imtb Posted December 2, 2009 Report Share Posted December 2, 2009 Looking for roadster Flywheel 6 bolt. LMK Link to comment
gcmustang Posted December 2, 2009 Report Share Posted December 2, 2009 Do you need flywheel for R16 or U20? Not sure if they are different but I have R16 stuff. Link to comment
imtb Posted December 2, 2009 Author Report Share Posted December 2, 2009 Hmm good questions. I am wanting to use it with my L2.2B I will try and find out which one I need or if anyone knows please advise. thanks, Link to comment
banzai510(hainz) Posted December 3, 2009 Report Share Posted December 3, 2009 if this is for a L motor you want a 200sx 77-79 200mm flywheel so you can run a Roadster pressure plate which is 650KG or just buy a alum from Fidanza Link to comment
67_1600 Posted December 4, 2009 Report Share Posted December 4, 2009 (edited) From what I recall, the U20 flywheel takes 12 bolts so most likely an R16. Edited December 4, 2009 by 67_1600 Link to comment
datzenmike Posted December 4, 2009 Report Share Posted December 4, 2009 I'm not aware that the 1.6 Roadster flywheel will fit the L20B or any other 6 bolt crank motor. Might, but never heard that it will. If you are looking for a 200mm flywheel that will fit the L 22 hybrid motor, you can find one on: '77-'83 200sx '78-'81 A-10 '75-'77 710 '75-'76 610 Link to comment
Abe Froman Posted December 4, 2009 Report Share Posted December 4, 2009 Here is a photo of a R16 Roadster flywheel, It is a 6 bolt but I do not believe it is the same bolt pattern as a L/Z 6 bolt crank. I hope this helps, Link to comment
imtb Posted December 4, 2009 Author Report Share Posted December 4, 2009 Dat zen Mike, your correct I found out the its the roadster clutch that fits the 200mm flywheel. I found a old Z car one thats 23#'s, I might take some material out of it like your drawing you posted. Link to comment
Recommended Posts