Brake Lights...need help

[oldsklminitrk]

Ok tonight I found out my brake lights quit workin....well I cant figurre it out...I still have running lights...I still have turn signals and reverse lights....I dunno where the stop light power supply comes from but it isnt getting power to it.I installed a jumper wire to it so it would have power and it still didnt work....any ideas??

[Bugeye]

It sounds like your turn signal switch

[oldsklminitrk]

Well that might be true...I had a extra lying around and used it but it really didnt perform much better you had to rock it into place for the turn signal to come on

[Bugeye]

take yours apart and clean the contacts, thats what I did on the 620

[datzenmike]

If your horn works then the fuse is fine.

 

The running and signals mean the ground at the rear is fine.

 

Be sure the turn signal is centered.

[banzai510(hainz)]

on 510s the horn fuse powers the swith at the pedal. See if one side has power????????

 

or oh it out ans see if the contack short wehn the pedal is pushed in.

[Braden]

check the brake light switch up by the pedal, maybe it is stuck in? mine did the opposite, the little rubber stop rotted off and the lights stayed on, i said the hell with it and put a stainless grade5 bolt in its place, that wont rot off anytime soon;)

[Braden]

actually it after re-reading your problem it sounds 95% like the switch, if the switch isnt working it wont complete the circuit no matter how many jumper wires you try, check into it then post back

[banzai510(hainz)]

jumper it with a wire to replace the switch just to see if it works!!!!!!!!

 

maybe bulbs blown out

[oldsklminitrk]

Ok I have taken the turn signal switch apart I have used a jumper and nothing.....I noticed that when I pull the hazzard switch the hazzard lights dont come on?......so Im wondering if thats it