datsun 160J SSS Posted April 6, 2009 Report Share Posted April 6, 2009 HI I am in need of the distributor base I have a new SSS distributor and the L20B base bolt down is on the worng side and the hole is out of alinement please any help thanks Link to comment
banzai510(hainz) Posted April 6, 2009 Report Share Posted April 6, 2009 put motor on TDC so the oil drive is hopefully in the 11:28 position now you migh be able to rig this to work by flipping the timming plate and using a MINI C clamp to hold the dizzy so it dont move. Just to get it to work or just get a L16 mount. I have mounts but dont want to part w/them as I have 2 new spare SSS dizzys The L20 pint can be converted to a Pertronix if you cut the Ring above the point lobes. Or the SSS is just s drop in Pertronix you use the stock coil and Ballast resisitor or equiv OHM wise so not to Pop the Pertronix as its a eleltronic trigger more than a true 12volt EI ignition. Link to comment
jefe de jefes Posted April 6, 2009 Report Share Posted April 6, 2009 HI I am in need of the distributor base I have a new SSS distributor and the L20B base bolt down is on the worng side and the hole is out of alinement please any help thanks post a pic of your wrong one. I may have the one you need. Link to comment
datsun 160J SSS Posted April 7, 2009 Author Report Share Posted April 7, 2009 shit I tryed to post photos I cant get it to work ,but yes the L20B base will work if I redrill the hole and tap but it looks like shit .Iam doing the polish aluminum look on the front of my motor and thats the only part mismatched I hate to polish that one my fingers cant take much more buffing Link to comment
hang_510 Posted April 7, 2009 Report Share Posted April 7, 2009 doing the polish aluminum look :lol: i may have one too. need to see pix of the wrong one... Link to comment
datsun 160J SSS Posted April 8, 2009 Author Report Share Posted April 8, 2009 Thanks guys you all are very upstanding group .can you send me an email and i will shoot you over a photo of the worng one :) mbkornuth@att.net Link to comment
Recommended Posts