Chance Posted July 29 Report Share Posted July 29 hey so I took the residual valve off my master cylinder and its a bit bigger than the one I took off the 83 720 for the front brake conversion will it still function? Quote Link to comment
datzenmike Posted July 29 Report Share Posted July 29 Is that the way they came out? Spring on top, rubber and cap on bottom? Probably will work if you swap that screw in cap as well. That was from the rear of the 720 master correct? The rear part of the master is for the front disc brakes. It should be marked F on the casting. Quote Link to comment
Chance Posted July 29 Author Report Share Posted July 29 54 minutes ago, datzenmike said: Is that the way they came out? Spring on top, rubber and cap on bottom? Probably will work if you swap that screw in cap as well. That was from the rear of the 720 master correct? The rear part of the master is for the front disc brakes. It should be marked F on the casting. yea it goes spring - rubber valve- then screw. yea its the residual valve for the front discs, I know I can just run no residual valve but if it can go in why not. my only hesitancy is that I don't want it to be flopping around in there and there's no way for me to check if its firmly in place when the crew is put on. Quote Link to comment
Crashtd420 Posted July 29 Report Share Posted July 29 There is another way... If you are unsure if it will work correctly or not, just leave it out and add one of these.... https://www.jegs.com/i/Wilwood/950/260-13783/10002/-1?msclkid=0af3c410fbfd1e498346a2b74b5eeef7 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.