Richie Posted December 16, 2020 Report Share Posted December 16, 2020 Hey guys. I just wanted some feed back on the intake. I made the plate to block the egr and got a Weber. Does it look right so far? Thanks https://imgur.com/a/Mf19K0F Quote Link to comment
datzenmike Posted December 16, 2020 Report Share Posted December 16, 2020 You need to drill and tap for the PCV valve. Very important to keep that functional. Then it will look and work correctly. This is for a '78 or '79? Nice, by the way.You should make and sell them. Quote Link to comment
Richie Posted December 16, 2020 Author Report Share Posted December 16, 2020 It’s for a 74 L16. I have the hole made already. Right in the middle the blue little circle it’s plug right now and tapped. I thought I might use it for a brake booster. But I’ll figure out the PCV. I appreciate your help. I wish I could sell these but I barely had time to do that one. 1 Quote Link to comment
datzenmike Posted December 16, 2020 Report Share Posted December 16, 2020 Excellent. Not everyone does it this well. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.