Dayton Posted August 13, 2020 Report Share Posted August 13, 2020 Hi I am rebuilding the flat tops on my 73 260Z. I have removed the power valve but cant disassemble it. I have taken out the three screws that hold the disc plates together but no luck. Tried to use a small screw driver and hammer to separate the disc plates but no luck. What I am missing? FYI, I dont need discussions about replacing the flats for the round tops.... thanks. 1 Quote Link to comment
datzenmike Posted August 13, 2020 Report Share Posted August 13, 2020 I don't think there are many 240 flattops in use and even fewer that their owners have taken apart. Possibly it isn't intended to come apart? Like the BCDD on later carbs.... best to just remove and put back on. 2 Quote Link to comment
Stoffregen Motorsports Posted August 13, 2020 Report Share Posted August 13, 2020 How crusty are the carbs? If you have new gaskets (not trying to re-use the old ones) then just use a razor blade and jam it in the crack to break the gasket seal. Should pry off then. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.