Jump to content

720 Torsion bar question


Recommended Posts

Is there a rule of thumb or a spec for how much of the splines of the torsion bar are supposed to show as it comes out of the torque arm? I replaced my lower control arm bushings and when I reinstalled the torsion bars (after cleaning them all nice) I see that I have 1/2" of splines showing on one side and 5/8" on the other. They were dirty before so I didn't take note of how much of the splines showed. 

  • Like 1
Link to comment
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I have never paid attention to the splines.  I always clean the splines and the bracket real good and grease well before assembly.  I put the "C" clip back on and let the torsion bar settle into place while driving.

  • Like 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.