edZon Posted August 13, 2018 Report Share Posted August 13, 2018 So I ordered a ignition switch from datsun-garage. I removed my old one and found besides the 6 pin on the ba k there is an additional 2 wires close to the key base. The new one doesnt have these. Is there re writing I have to do? Or was I givin the incorrect part? Quote Link to comment
datzenmike Posted August 13, 2018 Report Share Posted August 13, 2018 It's likely for the reminder buzzer that Nissan thinks you need because you are stupid enough to forget your key in the ignition. Prove them wrong. 1 Quote Link to comment
KELMO Posted August 13, 2018 Report Share Posted August 13, 2018 What Mike said. Are the 2 wires red with maybe a white or black stripe? Quote Link to comment
edZon Posted August 13, 2018 Author Report Share Posted August 13, 2018 From what my picture I took last night I see a red wire and a black one. Wiring diagram looks to be ignition lock. Quote Link to comment
datzenmike Posted August 13, 2018 Report Share Posted August 13, 2018 The one I had was red 'n black. The drivers door had a two part switch. One for the interior light and one to the key and the buzzer. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.