Yedi Posted August 14, 2014 Report Share Posted August 14, 2014 Ok i have a major problem somehow the pin that hooks the shifter onto the transmission is missing my family has been helping me with the restoration and had pulled motor and tranny there is a little pin with two c clips evidently that is missing now does anyone know where i can find this part to replace or if other models have the same size pin so i can search the bone yards praying Quote Link to comment
Yedi Posted August 14, 2014 Author Report Share Posted August 14, 2014 The pin if i wasnt clear is what holds the shifter to the tranny Quote Link to comment
bananahamuck Posted August 14, 2014 Report Share Posted August 14, 2014 Is hole on one side half round-ish or both sides round.. If both sides round almost any rear wheel drive datsun earlier than 85 might work.. I say might as you would still have to check for yourself. My brother lost the pin for his 510 trans, and he drilled the holes out to closest bolt size and used a nylock nut and bolt that has shoulder just wider that width of flanges. Still drives it like that to this day. 1 Quote Link to comment
datzenmike Posted August 14, 2014 Report Share Posted August 14, 2014 Only one E clip. # 32849-H1010 about $4 at Nissan dealer # 32854-24900 $0.50 Quote Link to comment
Yedi Posted August 14, 2014 Author Report Share Posted August 14, 2014 Thank you i will check the dealer couldnt find the part number for the life of me Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.