cjzeppy Posted June 29, 2014 Report Share Posted June 29, 2014 I searched Craigslist and found a FS add for a 74 710. I'm going to call tomorrow and see what the condition of the car is in. Hopefully pick it up for a couple hundred bucks, and get back into a Datsun again. My question is what parts can interchange with the 710s? I know my 510 could use 280zx struts and brakes, but are these the same way? EDIT: I forgot the link.... http://york.craigslist.org/pts/4540228124.html Quote Link to comment
flatcat19 Posted June 29, 2014 Report Share Posted June 29, 2014 "Parting out only" tells me lack of title. GL though. Quote Link to comment
cjzeppy Posted June 29, 2014 Author Report Share Posted June 29, 2014 "Parting out only" tells me lack of title. GL though. I can always file for a "lost title" it's a pain but I've seen it done. Quote Link to comment
INDY510 Posted June 29, 2014 Report Share Posted June 29, 2014 280zx struts work great .... but need coilovers, or smaller springs, just like a 510 510 camber plates, t/c rods, and bump steer spacers fit 710's 1 Quote Link to comment
cjzeppy Posted June 29, 2014 Author Report Share Posted June 29, 2014 280zx struts work great .... but need coilovers, or smaller springs, just like a 510 510 camber plates, t/c rods, and bump steer spacers fit 710's Thanks Indy. Just looked through the 23 pages or so of your 710 build. haha Quote Link to comment
zerow Posted July 1, 2014 Report Share Posted July 1, 2014 Some 610 parts also interchange, but INDY510 did name the most obvious parts. Quote Link to comment
Will Posted July 1, 2014 Report Share Posted July 1, 2014 It's possible to swap over the disc brakes from a 200SX that also uses a H165 rear axle, though it takes some work. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.