Curt Posted June 16, 2014 Report Share Posted June 16, 2014 What's a good way to remove this seal? Just tap it out slowly? Or grip and rip it out? Quote Link to comment
bananahamuck Posted June 16, 2014 Report Share Posted June 16, 2014 Either way works , it usually comes out super easy, just try not to scar aluminum. i just stick something into the inside corner a give it a whack . 1 Quote Link to comment
spottedog Posted June 16, 2014 Report Share Posted June 16, 2014 Tap it out from the inside with a screwdriver Quote Link to comment
Curt Posted June 16, 2014 Author Report Share Posted June 16, 2014 Thank you both. Quote Link to comment
q-tip Posted June 16, 2014 Report Share Posted June 16, 2014 Seal driver kit is about $25 and works great Quote Link to comment
Curt Posted June 16, 2014 Author Report Share Posted June 16, 2014 Thanks, I'm gonna have to resort to that. Damn thing is stuck real good. Quote Link to comment
datzenmike Posted June 16, 2014 Report Share Posted June 16, 2014 Large screwdriver or pry bar, and piece of wood to protect the aluminum face. Larger block of wood to pound it back in with. Be sure to grease the seal lips so the crank doesn't dry start on it. 1 Quote Link to comment
Curt Posted June 17, 2014 Author Report Share Posted June 17, 2014 Thank you, Got it out. I wouldn't have thought to lube it up. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.