71DIMER Posted September 7, 2008 Report Share Posted September 7, 2008 Hey fellas, well since I sold my truck I now have some parts I'm putting up for sale. I have a set of four 15"x7" aluminum 6 lug wheels. Here's some pictures for you to decide if they look good or not. No curb rash but there are some scratches on the clear coat. Oh and no I don't have the center caps...sorry. Located in Sunnyvale for pick up or can ship at cost (I wouldn't charge more than it really cost to ship, plus I have a UPS account so it's cheaper to ship using UPS than the post office most of the time!) Asking $150 obo or trade for 13" wheels (4x114 bolt pattern). I also have a unique side mounted diamond plate tool box. It's brand is Dee-Zee Platinum Series (?). It has a hinged door inside to allow for 2 seperate compartments. It's pretty slick. I've already had a few flake buyers from craigslist so I figure on seeing if any fellow Ratsuners want it. Asking $150 obo...just shoot me an offer :) Or again trade for 13" wheels (4x114 bolt pattern) Link to comment
motavated Posted September 8, 2008 Report Share Posted September 8, 2008 I give you 50 dowwa! I wont flake on you if it fits my 620 for that price.... The tool box and or the wheels... Link to comment
71DIMER Posted September 8, 2008 Author Report Share Posted September 8, 2008 I give you 50 dowwa! I wont flake on you if it fits my 620 for that price.... The tool box and or the wheels... Umm do you mean $50 down and the rest if they fit your 620? Sorry just don't quite understand your post. :) Link to comment
motavated Posted September 8, 2008 Report Share Posted September 8, 2008 Now its 25$!!!!!!! Nah, I just noticed that that tool chest looks weird on your truck. I'm guessing it was for a Chevy truck? Any who, just by looking at this design. I'm going to try and make one for my truck so it can be flush with the bed. But I'm still interested in the wheels... But 50 dollars is all I have I swear!!!!! :D Link to comment
71DIMER Posted September 8, 2008 Author Report Share Posted September 8, 2008 Umm sure for $50 I'll sell you 2 of the wheels :P...lol. Link to comment
dat620 Posted September 10, 2008 Report Share Posted September 10, 2008 what is the offset, reverse?, or centered?, also it looks like they take mag lug nuts, please reply, i'm interested, depends on off set, thx tom:) also where in sunny cali ? Link to comment
motavated Posted September 10, 2008 Report Share Posted September 10, 2008 For 100 a set I'm interested too.... But no money's! If they dont sell then I would be interested..... Link to comment
Bleach Posted September 10, 2008 Report Share Posted September 10, 2008 he can probably get $100 in recycled aluminum these days for those. or almost that much... :( Link to comment
71DIMER Posted September 12, 2008 Author Report Share Posted September 12, 2008 Hey fellas, sorry for the late response (thanks to the firewall at work I can't check Ratsun from work anymore :(...oh well) I'll get you guys the offset info tomorrow. Yeah I should check the local aluminum rate...:) Thanks...oh and I live in Sunnyvale CA to answer one of your questions. Link to comment
69FJWagon Posted September 12, 2008 Report Share Posted September 12, 2008 Hey fellas, sorry for the late response (thanks to the firewall at work I can't check Ratsun from work anymore :(...oh well) I'll get you guys the offset info tomorrow. Yeah I should check the local aluminum rate...:) Thanks...oh and I live in Sunnyvale CA to answer one of your questions. Mario its about $20 bucks a wheel at the place he in San Leandro Link to comment
71DIMER Posted September 12, 2008 Author Report Share Posted September 12, 2008 Hey that's good to know...thanks Clay! What have you been up to man...you should give me a call. Are you heading over to the Lathrop meetup this weekend? What's the status of your Datsuns? Link to comment
motavated Posted September 12, 2008 Report Share Posted September 12, 2008 Shh! Your scaring him away! :D Link to comment
69FJWagon Posted September 12, 2008 Report Share Posted September 12, 2008 Hey that's good to know...thanks Clay! What have you been up to man...you should give me a call. Are you heading over to the Lathrop meetup this weekend? What's the status of your Datsuns? I will call you this weekend... I need to build my engine for the wagon this sunday if Troys gunna be at the shop but other than that the status of my Datsuns...well, I still own them and they will get done sooner than later :lol: Clayton Link to comment
71DIMER Posted September 13, 2008 Author Report Share Posted September 13, 2008 Ok I looked them over but there's no offset stamping on it so I measured the backspacing and it's 3 5/8". Clayton: Cool...hopefully you'll be back driving your rides soon! Link to comment
71DIMER Posted September 14, 2008 Author Report Share Posted September 14, 2008 Truck wheels have been sold. Tool box still available. :) Link to comment
71DIMER Posted September 16, 2008 Author Report Share Posted September 16, 2008 Bump for the tool box...$130 for a ratsun member :) Link to comment
71DIMER Posted January 14, 2009 Author Report Share Posted January 14, 2009 Bump...lower price $100 Link to comment
Recommended Posts