allen dodson Posted September 7, 2008 Report Share Posted September 7, 2008 Any one have a link on how to adjust the valves? Quote Link to comment
moparvwfreak Posted September 7, 2008 Report Share Posted September 7, 2008 yup! here it is! Quote Link to comment
ppeters914 Posted September 8, 2008 Report Share Posted September 8, 2008 Here's a working link :D Adjusting L-series Valves Quote Link to comment
mklotz70 Posted September 8, 2008 Report Share Posted September 8, 2008 ...and if you want some pics to go with that :) http://www.nwde.org/extras/forum/forum_posts.asp?TID=3582&PN=1 Quote Link to comment
dat521gatherer Posted September 8, 2008 Report Share Posted September 8, 2008 thanks mike i cant stand answers with no pics. a pic is worth a thousand words. i love this forum for the pics. i've been on other forums that dont even know what pics are. Quote Link to comment
mklotz70 Posted September 8, 2008 Report Share Posted September 8, 2008 that was an NWDE thread from years ago. It was even easier to do pics on that forum. Quote Link to comment
allen dodson Posted September 8, 2008 Author Report Share Posted September 8, 2008 Thanks for the pics. Now i can get r done. Quote Link to comment
iceD Posted September 8, 2008 Report Share Posted September 8, 2008 I didn't see it mentioned in the instructions, so I suggest backing of the spark plugs.It makes it easier to turn over the motor. I would also suggest using a large wrench on the crank to turn the motor rather than jumping the starter, it makes it easier to get the cam exactly where you need it to adjust each valve. Derek Quote Link to comment
racerx Posted September 8, 2008 Report Share Posted September 8, 2008 You may want to grind down two open ended wrences 14 mm and 17 mm because it makes it easier to adjust the valves. Make them thinner...and use the shorty wrenches. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.