HAM8URGER Posted September 16, 2013 Report Share Posted September 16, 2013 So I searched for a while and couldn't find a definitive answer. I have a Nardi wheel on the way and was curious if there is an NRG hub adapter that will bolt straight to the 510 without having to use ANOTHER hub adapter before it. I've seen that people have done boss to nrg, or momo to nrg but i really want to just use an nrg only. This is the one I bought and its pictured bolted up to a boss adapter but I want to only use the NRG adapter. Thanks in advance... Quote Link to comment
TheShagginWagon Posted September 16, 2013 Report Share Posted September 16, 2013 I thought there was, but I have yet to find one. I was told that the SRK-140H model from nrg for the 240sx fit, but it does not. Quote Link to comment
HAM8URGER Posted September 16, 2013 Author Report Share Posted September 16, 2013 Someone told me the same thing but said he wasn't sure. Are you 100% that it doesn't work? Quote Link to comment
HAM8URGER Posted September 16, 2013 Author Report Share Posted September 16, 2013 What about that dodge one SRK-170H? Has anyone tried to get it to fit? Quote Link to comment
TheShagginWagon Posted September 16, 2013 Report Share Posted September 16, 2013 A buddy hooked me up with one and he was sure it would fit. It doesn't. The hole is too small to fit onto the steering column shaft. I fiddled with it for at least 20 minutes and nothing. A guy on here sent me this after I purchased Quote Link to comment
TheShagginWagon Posted September 16, 2013 Report Share Posted September 16, 2013 Fixed http://desertdatsuns.freeforums.org/f-s-steering-wheel-and-short-hub-adapter-t1355.html Quote Link to comment
HAM8URGER Posted September 16, 2013 Author Report Share Posted September 16, 2013 I JUST got off the phone with NRG and they said they are working on a 510 specific hub adapter and quick release, they are just waiting to test fit some prototypes and expect to have them out for sale in 3-4 months : / I guess I can wait Quote Link to comment
datsunfreak Posted September 17, 2013 Report Share Posted September 17, 2013 I thought there was, but I have yet to find one. I was told that the SRK-140H model from nrg for the 240sx fit, but it does not. Someone told me the same thing but said he wasn't sure. Are you 100% that it doesn't work? I am 100% sure the 240SX hub does not fit. The hole in the center is too large. Basically almost any hub/wheel for any 70s/80s Datsun/Nissan will interchange, but somewhere around the time the S13 came out they switched to a larger spline. All the 90s car seem to use the larger spline. Quote Link to comment
Tristin Posted September 17, 2013 Report Share Posted September 17, 2013 I talked to an NRG rep last year and they say they have a hub that works. Its listed as 510/610/710 compatible. He pulled up his dealer page online and showed it to me... The breakdown for Nissans hubs are all old Nissans interchange, then all newer Nissans interchange, and the 350z is completely different. Quote Link to comment
datsunfreak Posted September 17, 2013 Report Share Posted September 17, 2013 The breakdown for Nissans hubs are all old Nissans interchange, then all newer Nissans interchange, and the 350z is completely different. I stopped short of using a word like "all" because I know there are exceptions. B) Quote Link to comment
HAM8URGER Posted September 17, 2013 Author Report Share Posted September 17, 2013 I'm in no rush so ill run something else until NRG comes out with it. Quote Link to comment
510Finn Posted May 6, 2017 Report Share Posted May 6, 2017 I have the 510/610/710 NRG Short Hub, it's the model 142 and a Nardi Woody Wheel. The stock turn signal cancel roll pins on my stock '72 wheel doesn't fit the holes in the NRG hub (shorter depth, larger hole diameter). I measured the roll pin hole as best I could, it appears to be 5/32" or 4mm. I went to the hardware store, bought 6 of the metric button socket machine screws (5mm X 16mm) to mount the quick release (also NRG) to the NRG Short Hub, as well as picked up 2, 5/32" x 3/4" long roll pins and everything fit and worked perfectly. 1 Quote Link to comment
Scgreen620 Posted May 8, 2017 Report Share Posted May 8, 2017 The nrg 6 holes are different from the nardi 6 hole steering wheel ... So it will not bolt on with out the adapter plate ...if you bought the quick release with the hub the nardi steering wheel would fit because the quick release has 12 holes ... Hope I'm making sense ... I had troubles as well but with a 620 not a 510 hope it helps Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.