iwayman Posted June 18, 2013 Report Share Posted June 18, 2013 Is this camshaft usable? If so, what should I be doing to take off the surface rust to make it usable. Sometime this summer I'd like put this in my L28et because I've read that a series A cam is a pretty good mild cam upgrade for the p90 head. And I'd love any pointers on swapping cams, too. Quote Link to comment
KA620KC Posted June 18, 2013 Report Share Posted June 18, 2013 Couldn't you take it to a machine shop and have them hot tank it then polish it? Quote Link to comment
datzenmike Posted June 18, 2013 Report Share Posted June 18, 2013 WD-40 and a brass wire brush. 1 Quote Link to comment
darrel Posted June 18, 2013 Report Share Posted June 18, 2013 when I had surface rust like that, all it took was some oil and rubbing it with my fingers. Like DM said, brass brush and wd40 will work too. Quote Link to comment
iwayman Posted June 18, 2013 Author Report Share Posted June 18, 2013 Ok sounds good. I did some scrubbing on my rocker arms, do people reuse them? A couple have some uneven wear and/or scoring. http://imgur.com/a/qoOPP Would it be fine to use the current rocker arms from my p90 head, which only has around 1k on a rebuild, with this series A cam? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.