uieluck Posted April 28, 2013 Report Share Posted April 28, 2013 Alright, I'm totally STUCK! Basically, I can't even get the old manifold off. Hell, I haven't even thought about putting everything back together. At this point I wouldn't know where to start with vacuum hoses & such. However, I would feel "relieved" if I could just get the eff'in old manifold off! Here's the type of Offenhauser manifold I'll be putting on.http://community.ratsun.net/topic/52028-offenhauser-intake-manifold-6002/With a weber with it.Here's some oics, suggestions? Before I give up.... Quote Link to comment
MicroMachinery Posted April 28, 2013 Report Share Posted April 28, 2013 You have to get in there and be a little uncomfortable. Go from underneath with a box end wrench. Quote Link to comment
Laecaon Posted April 28, 2013 Report Share Posted April 28, 2013 First off. You have a heat riser exhaust/intake. You will need a new exhaust manifold to do this. Extensions, swivel joints, ratchet wrenches. Quote Link to comment
Jayden71 Posted April 28, 2013 Report Share Posted April 28, 2013 a few cuss words and bloody knuckles. I don't envy your task. I didn't have all that crap when doing my offy/weber install Quote Link to comment
619brosbulletside Posted June 3, 2013 Report Share Posted June 3, 2013 Bro ill help I live in Denver Quote Link to comment
Dawa Posted June 3, 2013 Report Share Posted June 3, 2013 wow that looks like a pain in the dick. for starters, hit everything with a penetrant/lubricant (wd40, pb blaster, etc) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.