Speed_Office! Posted April 4, 2013 Report Share Posted April 4, 2013 Clear title will come rolling on zx rim's and good tire's It sat for at least 10 years and at some point became a Parts car,The original L24 engine that's in it is said to have been running before the parting out began. The Pictures are from before I removed the hood,front lip,air cleaner assembly and the rim's from inside the car, otherwise what you see is what you get. I Need it gone and I am Hoping somebody here can give her a good home. The thing's I can think of that are gone off the top of my head are, Key's Hood front lip air cleaner assembly some throttle linkage clutch pedal and associated components Transmission,flywheel,clutch etc.(Driveshaft is still there and attached) interior combo switches/ignition rear tail light wiring Header's Otherwise the body is straight,some surface rust,The worst part of it is a small hole rusted through in the roof where the passenger a pillar meet's. Paint is crap of course, Good glass,Good suspension(has unknown yellow aftermarket lowering springs), Dash is there,gauges are there,Most of the wiring. The Car is located in Yelm,WA and will need to be towed. Call/text, Talon at: 253-576-7299 Link to comment
Speed_Office! Posted April 4, 2013 Author Report Share Posted April 4, 2013 If it doesn't sell soon I'm going to part it out further and scrap it. I really don't want to do that but im left without a choice. make me an offer. Link to comment
Josh V. Posted April 5, 2013 Report Share Posted April 5, 2013 Damn, I would but it's too far away. :crying: 1 Link to comment
Speed_Office! Posted April 5, 2013 Author Report Share Posted April 5, 2013 FRIDAY BUMP! Link to comment
Speed_Office! Posted April 6, 2013 Author Report Share Posted April 6, 2013 Saturday bump Link to comment
Speed_Office! Posted April 6, 2013 Author Report Share Posted April 6, 2013 might do trade plus cash If anyone has a good L6 clutch/flywheel/p plate setup that will support a 2+2 and some high compression. Link to comment
ArchetypeDatsun Posted April 6, 2013 Report Share Posted April 6, 2013 You can go with a 240mm flywheel from a 280zx 2+2 or 280zx turbo a 300zx n/a clutch should hold just fine, buddy of mine runs that in his 240z that he autocrosses. GLWS Link to comment
Speed_Office! Posted April 6, 2013 Author Report Share Posted April 6, 2013 thanks for the tip. Let's hope someone Offer's me something like that then. I just am tired of automagic and can't wait to unlock the potential of my car. I have just about everything needed besides clutch,flywheel,p plate and a clutch pedal and associated hardware to connect to the master and bolt into my pedal box. Link to comment
Speed_Office! Posted April 7, 2013 Author Report Share Posted April 7, 2013 PRICE DROP! Link to comment
motavated Posted April 8, 2013 Report Share Posted April 8, 2013 I got the flywheel you need... Link to comment
Speed_Office! Posted April 8, 2013 Author Report Share Posted April 8, 2013 Just a flywheel? Link to comment
Speed_Office! Posted April 8, 2013 Author Report Share Posted April 8, 2013 I pm'd you. Link to comment
Recommended Posts