graveltrapp Posted January 21, 2013 Report Share Posted January 21, 2013 Any knowledge as to whether the 1200 shares the same LCA bolt pattern with the 510? Looking for some spacers and all I have found are sets for the dimes.(don't want to pay B-Projects ridiculous prices). If no answer soon I will measure the spacing on my struts and post for comparison. Quote Link to comment
Skib Posted January 21, 2013 Report Share Posted January 21, 2013 only need one thread. other ones been deleted. Quote Link to comment
ggzilla Posted January 21, 2013 Report Share Posted January 21, 2013 If you are only lowering 1.5", there's no need for these. Most 1200 owners do not fit them. Quote Link to comment
graveltrapp Posted January 21, 2013 Author Report Share Posted January 21, 2013 only need one thread. other ones been deleted. You'll hear from my Lawyer... Thanks for the heads up, I would have hit the other thread up again thinking (knowing) I was losing my mind,,,, guess I was just being a little piggy. Quote Link to comment
graveltrapp Posted January 21, 2013 Author Report Share Posted January 21, 2013 Time will tell, as of know it only went about 3/4 of an inch lower and is not behaving poorly. So you may be correct old wise man. I will be dropping it another 1" I hope with the new strut inserts. Zilla,does your truck have them on board? Quote Link to comment
ggzilla Posted January 21, 2013 Report Share Posted January 21, 2013 My truck does not have roll center adjusters. But then again it is not lowered. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.