BlkSSnCPT Posted December 4, 2012 Report Share Posted December 4, 2012 so I've been slowly doing a little work on my 4 door, cleaned up the interior a bit when i got it home a while ago and i noticed the rear bench wasn't bolted down but i was just going thru the interior quickly cleaning it up a bit... well i got a little bit of time to check it out when i pulled the motor and tranny out and i didn't see any mounts on the floor pan or any type of tabs on the under side of the seat... can some of the fellow 4 door owners please post up pics of how the rear bench is mounted, please??? I'm sure i will have people sitting back there and i want to make sure the seat is secure, thnx in advance!!! -Rob Quote Link to comment
rpowell25 Posted December 5, 2012 Report Share Posted December 5, 2012 I am not sure the lower part has mounts...mine doesn't. It just slips down under the seat back and rests on the lip that is on the front of the platform the seat bottom rests on. The seat bottom metal spring has a molded indentation for that lip. It's that lip that keeps it in place along with the weight of the passenger(s). Lip/Rail: Molded Bottom: Under the Seat Back: Quote Link to comment
BlkSSnCPT Posted December 5, 2012 Author Report Share Posted December 5, 2012 oh ok, well i guess my seat is fine than... i thought there was some type of clip/tab or mount that was able to bolt down to secure them, thanks for the pics... maybe i'll bolt it down with something just for my own peace of mind... -Rob Quote Link to comment
screamer510 Posted December 5, 2012 Report Share Posted December 5, 2012 I seem to remember an open clip type that secured the bottom rail to the seat frame Quote Link to comment
FiveSeventyZee Posted December 6, 2012 Report Share Posted December 6, 2012 as long as people have their seatbelts on the seat shouldnt move. for the back atleast Quote Link to comment
datsunfreak Posted December 6, 2012 Report Share Posted December 6, 2012 Originally, there were two small tabs on the front edge that went straight down and were bolted to the rear seat bulkhead. They seem to have been removed on a lot of 510s, but I'd wager if you look and see, you'll see the bolt holes in the bulkhead just below the front edge of the seat. Quote Link to comment
datsunfreak Posted December 6, 2012 Report Share Posted December 6, 2012 Found this pic. You can just see the clip at the bottom of the photo. 1 Quote Link to comment
BlkSSnCPT Posted December 6, 2012 Author Report Share Posted December 6, 2012 Found this pic. You can just see the clip at the bottom of the photo. right on, yea i can see it at the bottom there... thanks guys, I'm gonna mess with the car a bit this weekend and i plan on giving the interior a good cleaning so I'll probably mess with the seat and see if i can think of a good way of bolting it down... -Rob Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.