wead Posted November 24, 2012 Report Share Posted November 24, 2012 Looking at purchasing parts from a 610 to make rust repair section what panels should i start with.Can't do rocker/sill at this point. Quote Link to comment
metalmonkey47 Posted November 24, 2012 Report Share Posted November 24, 2012 Floor pans, battery box. Quote Link to comment
MicroMachinery Posted November 25, 2012 Report Share Posted November 25, 2012 Around the rear wheel arches, the rear lower quarters, the front fenders at the bottoms, and around the windshields(top, sides) Quote Link to comment
bonvo Posted November 25, 2012 Report Share Posted November 25, 2012 yeah micro hit it dead on anything around the windsheald or back window under the stainless trim Quote Link to comment
Guest 510kamikazifreak Posted November 25, 2012 Report Share Posted November 25, 2012 Just reproduce a 510 and a 610 the results will be good Quote Link to comment
datzenmike Posted November 25, 2012 Report Share Posted November 25, 2012 yeah micro hit it dead on anything around the windsheald or back window under the stainless trim The metal strip under the rear window. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.