0.C. Posted November 15, 2012 Report Share Posted November 15, 2012 Thanks for your help Daniel. I'm also going to look into the front balance, might be a popular item to make. Quote Link to comment
DanielC Posted November 15, 2012 Author Report Share Posted November 15, 2012 I think you are talking about these parts. Datsun (Nissan) calls this part Assy-Apron. I have noticed a slight difference in this part, from the earlier reflector 521 trucks, to the later marker light 521 trucks. This probably will be another popular part. Another one. This part Datsun calls Rail-Rad core lower. Quote Link to comment
Jason Posted May 3, 2013 Report Share Posted May 3, 2013 Did anything ever come out of these replacement floor pan pieces? Quote Link to comment
DanielC Posted May 3, 2013 Author Report Share Posted May 3, 2013 This is what came out. I need to make my own panels. I have a pretty good fitting passenger side panel, and before I permanently weld it in, I want to use it as a pattern to make more. It appears to me that in order to get the new floor panels welded in, and seam sealed, the cab is probably going to have to be removed from the frame. This is the panel I made. I also had to repair the bottom of the kick panel, or wheel well, by adding a section to it. In this picture, my finger is approximately at the weld seam of the repair section. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.