spudly13 Posted August 12, 2012 Report Share Posted August 12, 2012 Im putting my l20 back together, since its apart i was going to just do a quick hone and rings, stock bore is supposed to be 85mm right? so with a pair of calipers i tried measing the cylinder, 84.61 is the most i can get out of it, and the piston 84.74, Tops of the pistons are marked u23, now im assuming that that is std bore because it measures less then 85? so order std rings? Thanks Edit; those measurements were taken with a pretty cheap pair of calipers Quote Link to comment
datzenmike Posted August 12, 2012 Report Share Posted August 12, 2012 I'll say. The Nissan specs for a std L20B piston is 84.984" to 85.035" Quote Link to comment
banzai510(hainz) Posted August 12, 2012 Report Share Posted August 12, 2012 I go with standard and gap the ends!!!!!!!!!!!!! cast rings seat fast. prime the oil pump!!!!!!!!!!!!put oil in it before install. Im sure you know this but people forget Quote Link to comment
spudly13 Posted August 13, 2012 Author Report Share Posted August 13, 2012 Alright sweet, just wanted to double check before i ordered them, thanks guys! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.