ohmrchristopher Posted April 14, 2012 Report Share Posted April 14, 2012 Seeing is believing, and understanding. I am requesting that this becomes a sticky thread for "Maintenance Picture Requests" only. Not your new wax job or rims and tyres but for helping others to fix their vehicles. I do have a Haynes manual but as far as pictures goes its really weak. I find I am asking for pictures of peoples wiring and hoses in their engine bays, and rear leaf/lowing block set ups, because things dont look right. Currently I am trying to overhaul my heater blower case with new foam, cleaning out the heater core and fixing the "ones-speed" fan. I have traced the fan speed down to this resistor being disconnected or rather falling apart. Now can someone supply me with a picture of their resistor? All I can find is the 300zx on Google and its different. I have the resistor, a metal washer, a plastic washer, and two metal tabs (they were together then broke apart) and a plastic screw that is broken on the end. To show my support for such a thread I have had several requests about Kiiros roof rack. I do give all props to DatDoug for building it, maybe he has plans. But in the mean time I have snapped some pictures to help you get the idea for building your own. Uh Datsun 038 by NickedKnuckles, on Flickr Uh Datsun 037 by NickedKnuckles, on Flickr Uh Datsun 035 by NickedKnuckles, on Flickr Uh Datsun 034 by NickedKnuckles, on Flickr Uh Datsun 033 by NickedKnuckles, on Flickr Uh Datsun 030 by NickedKnuckles, on Flickr Uh Datsun 029 by NickedKnuckles, on Flickr Uh Datsun 028 by NickedKnuckles, on Flickr So to reiterate, this is a picture request thread, try to keep the talking to a minimum. If done right this can be a very successful thread. I am also going to snap some photos of the heater core support and blower motor. Quote Link to comment
datzenmike Posted April 14, 2012 Report Share Posted April 14, 2012 What we need is less stickys. If we don't stop every forum will have the first 2 pages of just stickys. No one will look through them just like no one uses the FAQ or the search unless told to. Most of the maintainance pictures are in people's project or build threads. Quote Link to comment
ohmrchristopher Posted April 14, 2012 Author Report Share Posted April 14, 2012 Well you got me, I was searching blower motor rather then resistor, a picture did come up of an assembled one (that you posted) :blush: I still think a photo only thread would be handy, it has before on my other forum. If you think otherwise I'll let you close this thread and ill just email the pictures to the ppl that wanted them. Quote Link to comment
datzenmike Posted April 14, 2012 Report Share Posted April 14, 2012 OK here's mine... Quote Link to comment
metalmonkey47 Posted April 14, 2012 Report Share Posted April 14, 2012 Where's that resistor at? I need to find mine. Fan only works on high. Quote Link to comment
ohmrchristopher Posted April 14, 2012 Author Report Share Posted April 14, 2012 Driver side, near top. Behind the defrost tube. You'll see two wires going into in and maybe your Defrost/heat cable will be against it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.