RaptorReed Posted May 13, 2012 Author Report Share Posted May 13, 2012 waiting for another set of tie rods and stabilizer link to arrive, but for now I did get some tires on my Enkeis Quote Link to comment
Komeuppance Posted May 20, 2012 Report Share Posted May 20, 2012 Mitsubishi FTW... your screen name looks familiar, haha. -Robert Quote Link to comment
ofg Posted May 20, 2012 Report Share Posted May 20, 2012 rwd 4g63 makes me happy. Quote Link to comment
RaptorReed Posted October 6, 2012 Author Report Share Posted October 6, 2012 haha Robert. been a while lol, Currently got the dash apart and fuel tank off the wagon. Time to get the leaky tank restored :) and head up to Whatcom Radiator in Bellingham, as for the radio, I'm upgrading the original Mitsu AM radio to a Retrosound AM/FM Stereo. Requires some trimming of the factory spot on the dash, but should be retaining the factory holes for the dials and look stockish. Also currently in search of either some new front struts. Oh does anyone know where to get linkage parts for Mikuni Sidedrafts? ;) Coupe This guy, I'm heading down to the shop next friday and the following tuesday to get some long await drivetrain work done and remove the wiring harness completely from the car. Is this turbo big enough? Quote Link to comment
RaptorReed Posted November 20, 2012 Author Report Share Posted November 20, 2012 Bringing this home later next month, just need to pull the 2.0l out of the 77 to go into this one. Quote Link to comment
Komeuppance Posted November 20, 2012 Report Share Posted November 20, 2012 LOL... you got another one?? g54b swap yo. -Robert Quote Link to comment
RaptorReed Posted November 21, 2012 Author Report Share Posted November 21, 2012 I was going to g52 swap it for now, need it in dd status! One project at a time then I'll do a g54 destroker ;). Quote Link to comment
Komeuppance Posted November 25, 2012 Report Share Posted November 25, 2012 Ballin'!! -Robert Quote Link to comment
Syncro Posted November 26, 2012 Report Share Posted November 26, 2012 what tranny are you running on the 4g63 rwd swap? Quote Link to comment
Tristin Posted November 27, 2012 Report Share Posted November 27, 2012 It's an R154 with a custom bellhousing adapter. Quote Link to comment
LenRobertson Posted November 27, 2012 Report Share Posted November 27, 2012 Maybe not of any interest, but when I was at Spokane Valley Pull n Save Saturday, there were 3 Colts out in the yard. They caught my eye, cause of being classic Japanese styling. P&Ss online inventory shows '74, '75, and '77 all located in the same row. It makes me wonder if they all came in together from the same owner. But I have no idea if these are any desirable model. If I learn too much about Colts, I'll be wanting one! Don't need more cars! Len Quote Link to comment
RaptorReed Posted November 28, 2012 Author Report Share Posted November 28, 2012 They do if their dashes are in good shape, and if one is a GT is of value to me for certain engine parts. Quote Link to comment
RaptorReed Posted December 30, 2012 Author Report Share Posted December 30, 2012 Finally have the 75 home now, Pulling its' motor tomorrow morning. Quote Link to comment
Komeuppance Posted December 30, 2012 Report Share Posted December 30, 2012 Eclipse?? Lol... -Robert Quote Link to comment
RaptorReed Posted December 30, 2012 Author Report Share Posted December 30, 2012 Yep there is a POS 3rd gen eclipse in the driveway, it doesn't belong to me, nor getting fixed by me, just visiting lol. Quote Link to comment
RaptorReed Posted January 21, 2013 Author Report Share Posted January 21, 2013 4G52 and 4spd bolted in! 1 Quote Link to comment
Komeuppance Posted January 21, 2013 Report Share Posted January 21, 2013 Needs a secondary air system delete!! -Robert Quote Link to comment
RaptorReed Posted January 21, 2013 Author Report Share Posted January 21, 2013 Enlighten me on FB! Anyway, trans bolted on, new water pump installed, radiator in, and big stuff left to do: connect driveshaft then bolt trans crossmember. Quote Link to comment
hosestop@msn.com Posted January 21, 2013 Report Share Posted January 21, 2013 Hey there is another wagon forsale in nor Cal ,I have # Quote Link to comment
RaptorReed Posted February 11, 2013 Author Report Share Posted February 11, 2013 running and driving finally Now to pack all my stuff up and get ready for moving to the Tacoma/Olympia area next month :). Quote Link to comment
TENDRIL Posted February 12, 2013 Report Share Posted February 12, 2013 hey not to thread jack but, i have a g54b in, and a 89 might max chassis under my 67 520, and i was wondering if you know anything about suspension and lowering on those trucks?, and also if you have heard of side-drafts put on the g54b? Quote Link to comment
Tristin Posted February 12, 2013 Report Share Posted February 12, 2013 hey not to thread jack but, i have a g54b in, and a 89 might max chassis under my 67 520, and i was wondering if you know anything about suspension and lowering on those trucks?, and also if you have heard of side-drafts put on the g54b? Tim is building a set of side drafts for his right now... 1 Quote Link to comment
TENDRIL Posted February 12, 2013 Report Share Posted February 12, 2013 g54b? if so where did he find the intake mani? i found one from aussi for like 300 bucks did he build it? Quote Link to comment
Tristin Posted February 12, 2013 Report Share Posted February 12, 2013 Not too sure honestly. I just know he is in the process. I'll text him in the morning if he doesn't chime in by then. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.