Mr. BOHICA Posted January 29, 2012 Report Share Posted January 29, 2012 Greetings all- Can anybody identify this manifold? It appears that there was a stamp of some sort on the top on the crossbar (term?) but it is illegible. Also, I added a few question marks on the pic regarding applicable PCV install and an unknown inlet/ outlet. Sorry, text was not working in paint... For the PCV location question, the PCV valve will screw into the hole location. Thanks in advance! Quote Link to comment
banzai510(hainz) Posted January 29, 2012 Report Share Posted January 29, 2012 the hole under the 2 intake ports likes like a water hole to heat the intake. At least that is the stock location but if the hole goes nowhere then its worthless. Maybe soembody drilled it. pour water in there and see where it goes. The one on top on the right side might go to a brake booster the one on bottom I guess can go to a PCV valve but I plug all these up. I open vent the crank case.when running my dual carbs I personally dont like intakes and best just to get a dual set up . Mopst people have a hard time jetting them as most are jetted for a 2 carb system or close to it. Quote Link to comment
73GTV Posted January 29, 2012 Report Share Posted January 29, 2012 Greetings all- Can anybody identify this manifold? It appears that there was a stamp of some sort on the top on the crossbar (term?) but it is illegible. Also, I added a few question marks on the pic regarding applicable PCV install and an unknown inlet/ outlet. Sorry, text was not working in paint... For the PCV location question, the PCV valve will screw into the hole location. Thanks in advance! Are these not the same mount? Measure and compare (K24/L-16 L18, L20B) Please correct me if I'm wrong. Link to another site> http://www.datman.co....php?f=9&t=2504 Quote Link to comment
ggzilla Posted January 29, 2012 Report Share Posted January 29, 2012 That's a Warneford manifold. Lots of places sell them with their own brand name, such as Redline. But still a Warneford. Quote Link to comment
Mr. BOHICA Posted January 30, 2012 Author Report Share Posted January 30, 2012 Outstanding thanks guys. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.