Radiant-Designer Posted December 6, 2011 Report Share Posted December 6, 2011 Spent my day off and one of the last few good days left pulling what i could off the 1976 620. it was red, if anyone needs a body piece, the hood was in good shape i may keep that just in case but the shell and engine will probably be scrapped unless someone wants something. The truck had 46,000 miles on it and was parked long ago when someone started rebuilding the engine, looks complete but never put back on the road 9off since 1980) The oil i drained from the trans looked very good as did the oil from the engine. as for pricing I really am not sure, I hate asking too much for any of this so please make an offer if you think its too high. I also have a good flywheel,clutch, almost all the side lights and brake lights (except the pass side back side and brake) Trans, starter, etc. oh yeah and a bunch of 720 mirrors. Parcel tray and 510 fans. (I also have a 620 fan too) $20 for parcel tray, $10 for 510 fan, $15 for a 620 fan Headlights (both sides a little rusty but should clean up good) $40. Bumper supports $25 Grill, has all 4 trim rings $50 Datsun Valve cover $35 ( I have a regular nisasan Oil cap and 2 elephant ones. I will sell all those separate if interested) Drive train with very good U joints $100. Exhaust (I had to cut the front pipe about 4" before the clamp to get it out) Link to comment
Radiant-Designer Posted December 6, 2011 Author Report Share Posted December 6, 2011 should probably include a little more dually adapters $50 reat gate $50 These Im marking cheaper becuase i know shipping will suck. I dont have a pic of the hood but say $75 for that I also have 2 nissan valve covers too. $30 each Link to comment
Eagle_Adam Posted December 6, 2011 Report Share Posted December 6, 2011 is the parcel tray cracked at all? if not i call dibs :D Link to comment
Radiant-Designer Posted December 6, 2011 Author Report Share Posted December 6, 2011 i dont remember seeing any cracks at all on it but I will double check and get a close up pic tonight/tomorrow am. i also remembered there is a sway bar if anyone is interested i can go and pull that too. Link to comment
Radiant-Designer Posted December 6, 2011 Author Report Share Posted December 6, 2011 And i did find the top of the clam shell for the steering column too Link to comment
K_trip Posted December 6, 2011 Report Share Posted December 6, 2011 I need the windshield wiper transmission (linkage) and wiper arms. If this truck sat outside for a long time, these parts might be toast. If they are in good working order, I would be interested in them! And for those who are lurking: If anyone else has these parts for a 1973~76 620 ... drop me a line! Link to comment
Radiant-Designer Posted December 6, 2011 Author Report Share Posted December 6, 2011 I can pull the wiper parts, it was outside for a while, do you know how to test them without having a working truck?? Link to comment
Radiant-Designer Posted December 6, 2011 Author Report Share Posted December 6, 2011 Lime D, the grill is available, I would have to get some estimates on shipping, Link to comment
Drummerboy4as Posted December 6, 2011 Report Share Posted December 6, 2011 How bout passenger side door hinges? I have a '73, would '76 hinges work? Link to comment
Radiant-Designer Posted December 6, 2011 Author Report Share Posted December 6, 2011 sorry i already sold those hinges... lol funny two people want the pass side door hinges... Link to comment
Drummerboy4as Posted December 6, 2011 Report Share Posted December 6, 2011 Drats! Yeah the passenger side lower hinge is cracking and making it really hard to open the door. Wonder if it's a common problem... Link to comment
Radiant-Designer Posted December 6, 2011 Author Report Share Posted December 6, 2011 Very rough idea on shipping the grill, I guessed 45" by 8" by 4" and roughly 10 lbs and UPS ground was about $15 Link to comment
K_trip Posted December 6, 2011 Report Share Posted December 6, 2011 I can pull the wiper parts, it was outside for a while, do you know how to test them without having a working truck?? Thanks!!! I got your reply here, and answered your question as best as I could ... http://community.rat...n-linkage-arms/ Link to comment
Radiant-Designer Posted December 7, 2011 Author Report Share Posted December 7, 2011 Ill try to take a look tomorrow if weather cooperates. Link to comment
Radiant-Designer Posted December 7, 2011 Author Report Share Posted December 7, 2011 If anyone needs engine parts it had a l20b motor, turns over easy by hand Link to comment
Radiant-Designer Posted December 7, 2011 Author Report Share Posted December 7, 2011 I believe its a U67 head. If anyone is interested ill sell head, cam, piston, or the whole thing. Shoot me an offer to make it worth my time to pull it apart and pack. Open to trades too! Link to comment
Z chopper Posted December 7, 2011 Report Share Posted December 7, 2011 Datsun valve cover with elephant cap? Link to comment
Radiant-Designer Posted December 7, 2011 Author Report Share Posted December 7, 2011 Shipping to bc who would be responsible for taxes, duties, etc? Link to comment
Z chopper Posted December 7, 2011 Report Share Posted December 7, 2011 Shipping to bc who would be responsible for taxes, duties, etc? that would be me Link to comment
Radiant-Designer Posted December 7, 2011 Author Report Share Posted December 7, 2011 I'll look into flat rate. Nh has no sales tax Idk about international taxes. Link to comment
psymansays Posted December 8, 2011 Report Share Posted December 8, 2011 Is the transmission available? If so, how much? I will send you a PM. Link to comment
Radiant-Designer Posted December 8, 2011 Author Report Share Posted December 8, 2011 transmission is available, but Ill be honest, you could probably get one in CA for less than it would be just in shipping this one cross country. Link to comment
Radiant-Designer Posted December 8, 2011 Author Report Share Posted December 8, 2011 Parcel tray looks great Link to comment
Radiant-Designer Posted December 8, 2011 Author Report Share Posted December 8, 2011 Grill and Parcel tray are on the loading dock waiting for UPS to pick them up. Looking into USPS flat rate international for a valve cover and a few other items, looking for best way to ship the dually adapters to get a shipping price on them too. ...am i forgetting anything??? Link to comment
Recommended Posts