Dime Dave Posted September 14, 2011 Report Share Posted September 14, 2011 I have received interest in new VTO wheels for Datsun Trucks. If VTO can do it, it will be with their Classic 8 wheel and the bolt pattern would be 6 x 139.7mm (6 x 5.5"). Currently the biggest bolt circle they can do is a 130mm. Sizes would likely be: 15x6 +24 offset (4.44" backspace) 15x7 +0 (4.0" BS) 15x7 +12 (4.47"BS) 15x7 +25 (4.98" BS) 16x7 +12 (4.47" BS) I need the following tech support to explore this further with them. What bore center is needed to fit the Datsun trucks (and very early sedans)? Currently these wheels all have a 73.1mm center bore. Will this work for any of the trucks? Next what offsets/back spacing will work? Any feedback on these dimensions will help. This is the wheel style, all sizes come in silver and the 15x7's comes in a black spoke as well. 1 Quote Link to comment
nismo dr Posted September 14, 2011 Report Share Posted September 14, 2011 thank you for exploring this 1 Quote Link to comment
Dime Dave Posted September 14, 2011 Author Report Share Posted September 14, 2011 More than happy to. I just need to know what center bore is needed and what offsets will work. Quote Link to comment
yello620 Posted September 14, 2011 Report Share Posted September 14, 2011 Dave, i really like the fitment of my xterra wheels. They are 16 x 7 +40 wheels from the 02-04 xterra's. Dave, I am using Nissan Hardbody(86-95?) spindles and Xterra wheels and the hub bore all matched at 100mm. Would be very nice to be able to maintain the hubcentric part of the wheel. Quote Link to comment
Z chopper Posted September 14, 2011 Report Share Posted September 14, 2011 sweet, I messaged you through your site a couple weeks ago about this. :cool::wub: :hyper: :thumbup: :frantics: :thumbup: Quote Link to comment
Radiant-Designer Posted September 14, 2011 Report Share Posted September 14, 2011 would it help if you had a truck to look at and test? I am in NH as well and have a 77 620 Quote Link to comment
Radim Posted September 15, 2011 Report Share Posted September 15, 2011 Sorry, but i personally want some aggresive fitment... Maybe 15x9.5 15x10 0 to -20 or in 16" Quote Link to comment
flatcat19 Posted September 15, 2011 Report Share Posted September 15, 2011 15x8 -10 thru -20 or -25 15x7s could get even more aggressive. Something deep, but maybe not as deep as say a K5 Blazer wheel. I'd love to see this pan out. Sorry I don't have measurements for the center bore. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.