dspeirn Posted August 25, 2011 Report Share Posted August 25, 2011 so i finallly got my car running but i still need to work out some kinks. I start the engine and it runs fine i rev it up and it advances and sounds good. problem is when i put it in gear and let the clutch out it falls on its face, it doesn't totally die but almost and then i can get it to come back up but then it still barely has any power. i shot it with the timing light, but i don't know what marks to line up for the correct advance. any help would be appreciated. im pretty sure its a timing and or mixture thing. Quote Link to comment
jefe de jefes Posted August 25, 2011 Report Share Posted August 25, 2011 http://www.olddatsuns.com/620tech2.htm#TM http://www.redlineweber.com/html/Tech/carburetor_set_up_and_lean_best_.htm Quote Link to comment
banzai510(hainz) Posted August 25, 2011 Report Share Posted August 25, 2011 has this run before? or was the oil pump changed/front cover and its off tooth on distributor olddatsuns.com Quote Link to comment
dspeirn Posted August 25, 2011 Author Report Share Posted August 25, 2011 yeah i drove with it in someone elses car, pulled it, it sat for about a year, then startred right up. i got all new plugs and wires by the way and good compression on all cylinders. also as a sidenot i have dual mikuni 44s. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.