68Datsun510 Posted April 8, 2011 Report Share Posted April 8, 2011 Forgive me if i missed a post somewhere, but ive been searching for a guide or at least some info regarding the steps required and the difficulty of swapping out a J13 for an L series. Ive read thru a lot of peoples builds, but none that i found had a 521/J13, it was all earlier models. So, to swap in an L series, obviously, you need to remove the J mounts, and you will need to modify the trans mount and driveshaft. And you need to remove the 'extra shroud' to fit an L rad further forward. Thats all basic stuff, as ive done it all in my 510. My concern is the engine bay. Is it just a matter of swapping engine mounts? Are there any other clearance issues? THe e-brake system for instance? PIcs would be greatly appreciated from anyone else who has done the swap. Info and guidance as well. Im trying to weigh the cost vs benefit of an L/5 speed swap vs rebuilding the tiny J13. Thanks in advance!! Quote Link to comment
68Datsun510 Posted April 8, 2011 Author Report Share Posted April 8, 2011 Yes, i stuck this in the engine forum, as engine/swap knowledgeable people tend to be here, i would think anyway... If im mistaken, sorry, move the thread. =) Quote Link to comment
wayno Posted April 8, 2011 Report Share Posted April 8, 2011 As far as I know the e-brake is the same from 1966 threw 1972. The future stock L block radiator mount holes are hidden behind the J block radiator core support, so you just cut it out, otherwise everything was basicly made the same from late 68 till 72 in the engine bay sheet metal as far as i know. Quote Link to comment
68Datsun510 Posted April 8, 2011 Author Report Share Posted April 8, 2011 Good to hear, yeah, i can see the holes already. The more i dig into this J engine the more i am concerned that the money spent on IT could pay for another swap to stick a brand new L19 in it with a ZX transmission... Quote Link to comment
wayno Posted April 8, 2011 Report Share Posted April 8, 2011 Good to hear, yeah, i can see the holes already. The more i dig into this J engine the more i am concerned that the money spent on IT could pay for another swap to stick a brand new L19 in it with a ZX transmission... L19??? Quote Link to comment
68Datsun510 Posted April 8, 2011 Author Report Share Posted April 8, 2011 Hybrid L motor, 18 block/crank, 16 rods, Z22 pistons, closee chamber head, comes out to 1860cc's Quote Link to comment
The datsun kid Posted April 10, 2011 Report Share Posted April 10, 2011 dude that sounds sick u make that yet or just plannin? Quote Link to comment
ggzilla Posted April 10, 2011 Report Share Posted April 10, 2011 L19 costs more and is less than L20B ... what's the point? L20B will rev to 7000 RPM, so no advantage to the shorter stroke. Theoretically there is but you'll never notice it. Quote Link to comment
68Datsun510 Posted June 2, 2011 Author Report Share Posted June 2, 2011 Nice smack down ggzilla. Bought it from a friend last year, rebuilt it over the winter, and i now have a very happy running and broken in high compression L19. Yeah, its essentially an L20B, its cammed so its a little soft under 2k, but im happy with it. No loss or excessive cost to rebuild, same as any engine. Also, even if i were to have created it myself, what cost?? Its assembled from easy to find bits n pieces. Anyway...i suppose on top of it all, i have the rare poo green 510 with the "WTF" engine. Its different. Quote Link to comment
wayno Posted June 3, 2011 Report Share Posted June 3, 2011 L19 costs more and is less than L20B ... what's the point? L20B will rev to 7000 RPM, so no advantage to the shorter stroke. Theoretically there is but you'll never notice it. My L20b might rev to 7000rpm if I floor it in neutral, the highest I have had mine is 5000rpm, and there was nothing left, except to wait for it to blow up. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.