ppeters914 Posted February 26, 2011 Report Share Posted February 26, 2011 Can someone (or ones) with a Weber 32/36 DGV take a pic of the choke rod? Mine is missing: I want to confirm if it's this piece or not: which is Item 7: Also want to confirm how it connects to the choke shaft because mine appears different: And if anyone has that piece they'd like to give-a-way/sell, just PM me. Thanks. Pete Quote Link to comment
ggzilla Posted February 26, 2011 Report Share Posted February 26, 2011 Mine does not look like that. I'll run out and take a photo. Quote Link to comment
ggzilla Posted February 26, 2011 Report Share Posted February 26, 2011 wow it is colder than usual in the garage. Found a dozen carburetors, but they are all Hitachis. couldn't find the webers. Anyways amy choke rod is not a rod, it is a flat sheet metal shape. I remember because it fits up though a little plastic piece which has a slot for it, not a round hole like a rod, but a rectangular slit. Quote Link to comment
ppeters914 Posted February 26, 2011 Author Report Share Posted February 26, 2011 Could it be my 32/36 ain't a 32/36? Didn't see any markings anywhere. Just 'Weber' and 'Made in Italy'. Quote Link to comment
hang_510 Posted February 26, 2011 Report Share Posted February 26, 2011 (edited) that would be the correct piece. but your butterflys seems to have a different connector Edited February 26, 2011 by hang_510 Quote Link to comment
ggzilla Posted February 26, 2011 Report Share Posted February 26, 2011 It is the wrong part for the Weber in the photos, which looks just like my 32/36. * Ours have a choke shaft lever with pin & tiny circlip. * the diagram is for a different year of 32/36, the choke shaft lever with hole in it. Which uses part #7 Quote Link to comment
ggzilla Posted February 26, 2011 Report Share Posted February 26, 2011 Yep, just like that latest photo. Apparently they made 'em both ways. Quote Link to comment
ggzilla Posted February 18, 2012 Report Share Posted February 18, 2012 Pete, this is what you need: 36 - choke linkage 6 - E-clip 7 - sliding seal (plastic) This is DGAV, but DGEV is the same except for 45 + 48. Quote Link to comment
philcas1987 Posted February 18, 2012 Report Share Posted February 18, 2012 looks like someone mixed and matched parts.the bottom half is manual choke. the top half is for electric choke. thats why the rods dont match up Quote Link to comment
ggzilla Posted February 18, 2012 Report Share Posted February 18, 2012 By jove, I think you've got it. Looks that way to me too. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.