metalmonkey47 Posted October 6, 2010 Report Share Posted October 6, 2010 Anyone know where I can find proper adapters for oil pressure and water temp sensors to adapt to an A series? Both adapters are 1/8NPT I think, but I don't know what the correct size is. Quote Link to comment
banzai510(hainz) Posted October 6, 2010 Report Share Posted October 6, 2010 1/8 BSP autometer sell them. it goes in the block where the sender used to go. its posted on here just recently and YOU saw it!!!!!!!!! Quote Link to comment
metalmonkey47 Posted October 6, 2010 Author Report Share Posted October 6, 2010 1/8 BSP autometer sell them. it goes in the block where the sender used to go. its posted on here just recently and YOU saw it!!!!!!!!! Well, I checked up on that but my water temp sender is way larger then 1/8. Assuming all are going to be BSP right? Quote Link to comment
banzai510(hainz) Posted October 6, 2010 Report Share Posted October 6, 2010 water temps I have no clue. I trust the stock ones and dont want to run a catapiller line to the dash. I had one once and was just lucky that it fit. Quote Link to comment
metalmonkey47 Posted October 6, 2010 Author Report Share Posted October 6, 2010 water temps I have no clue. I trust the stock ones and dont want to run a catapiller line to the dash. I had one once and was just lucky that it fit. Mines all electronic so Plus the stock ones didn't work very well. Maybe I'll have to make a few phone calls Quote Link to comment
nismo dr Posted October 6, 2010 Report Share Posted October 6, 2010 What the heck kinda auto parts store do you work at? :blink: :lol: you gotta have some catalog or something with all kinds of that junk, my water temp gauge (that i got at vatozone) came with multiple adapters Quote Link to comment
metalmonkey47 Posted October 6, 2010 Author Report Share Posted October 6, 2010 What the heck kinda auto parts store do you work at? :blink: :lol: you gotta have some catalog or something with all kinds of that junk, my water temp gauge (that i got at vatozone) came with multiple adapters My store is in the ghettos dude Our catalogs have all been stolen or had shit spilled on them by idiots. What kind of gauge? Quote Link to comment
metalmonkey47 Posted October 7, 2010 Author Report Share Posted October 7, 2010 sunpro I bought a set of those a while back and none of the adapters fit my engine. Quote Link to comment
izzo Posted October 7, 2010 Report Share Posted October 7, 2010 make a trip to the hardware store, you can make your own adapters lol Quote Link to comment
metalmonkey47 Posted October 7, 2010 Author Report Share Posted October 7, 2010 make a trip to the hardware store, you can make your own adapters lol lol Ratsun style FTW! How would you recommend it though? What kinda parts am I lookin for? Quote Link to comment
izzo Posted October 7, 2010 Report Share Posted October 7, 2010 Take a look at your gauge, take a look at where it connects. Figure out what you will need, pretty simple. IIRC hainz said there was a good type of line to use if its manual water/oil gauge that lasts a while. Quote Link to comment
nismo dr Posted October 7, 2010 Report Share Posted October 7, 2010 do you still have the old sending unit - take that - take your new one walk in, mix and match. your making it harder that it needs to be. Hell, there a chance you could find what you need at home depot - thats where i got most of my fuel plumbing. Quote Link to comment
metalmonkey47 Posted October 7, 2010 Author Report Share Posted October 7, 2010 Take a look at your gauge, take a look at where it connects. Figure out what you will need, pretty simple. IIRC hainz said there was a good type of line to use if its manual water/oil gauge that lasts a while. lol my new gauge is elecrical, not mechanical, so I don't have to run any annoying lines. Just wires do you still have the old sending unit - take that - take your new one walk in, mix and match. your making it harder that it needs to be. Hell, there a chance you could find what you need at home depot - thats where i got most of my fuel plumbing. yeah, youi're right. I blame the Dr. Pepper I'll go play at Home Depot after my sisters wedding I'm just being a lazy ass. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.