metalmonkey47 Posted August 28, 2010 Report Share Posted August 28, 2010 Does anyone know how to remove door trim from a B310? Or any other trim for that matter.. I want to be very through with my upcoming paint job. BTW, I know there was a thread on this once before, but I couldn't seem to find it, so don't crucify me. Quote Link to comment
I'm BLUE Posted August 28, 2010 Report Share Posted August 28, 2010 oics pease :P ,,, interior/exterior ? Quote Link to comment
metalmonkey47 Posted August 28, 2010 Author Report Share Posted August 28, 2010 (edited) You're fast :o Exterior.. hold on and I'll see if I can find the oic. Here we go: It's the trim just below the window. That chrome trim that is right above the mirror. Edited August 28, 2010 by metalmonkey47 Quote Link to comment
ggzilla Posted August 28, 2010 Report Share Posted August 28, 2010 yep, just slip a table knife or putty nife in between the panel and door, and slide it up/down until you hit the clip. Then carefully pry it off where the clip is. The long 2-door panels have about five clips in it Quote Link to comment
metalmonkey47 Posted August 28, 2010 Author Report Share Posted August 28, 2010 Is all the trim attached the same way? Quote Link to comment
ggzilla Posted August 28, 2010 Report Share Posted August 28, 2010 Only the side panel trims. The pillar trims is just held on by the welting. Quote Link to comment
I'm BLUE Posted August 28, 2010 Report Share Posted August 28, 2010 yeah ,,, :hmm: ,,,I have never had the stuff come off the way I want it too , but I try to be super careful that way :D Quote Link to comment
ggzilla Posted August 28, 2010 Report Share Posted August 28, 2010 yao be careful... Quote Link to comment
metalmonkey47 Posted August 28, 2010 Author Report Share Posted August 28, 2010 Yeah I screwed up a few of the clips for the door panels already My car leaked water, so It was all soggy and moldy and it kinda went byebye :( Anyways, thanks for the advice!! I'll see what i can do and update if I have any problems. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.