Joe B Posted June 23, 2010 Report Share Posted June 23, 2010 Saw this on Ebay and am thinking of ordering a head for my 720, just cause. Any one have experience with them? Price is great, but you know the saying you get what you pay for. Hopefully it does not apply here and they have pretty positive feedback. Head - Ebay Just in case link does not work http://tinyurl.com/2bka5me Quote Link to comment
datzenmike Posted June 23, 2010 Report Share Posted June 23, 2010 There are two different port sizes on the NAPS Z motors. Smaller round for the Z20/22 and larger square ones for the Z24. Strictly speaking, that, round port head will fit all NAPZ motors but the intake isn't the best match up. Also there are two different combustion chamber sizes between the Z20E and Z20S motors. Quote Link to comment
Skib Posted June 23, 2010 Report Share Posted June 23, 2010 $150 for a rebuild head? :hmm: they dont even list what works been done to it....... I personally wouldnt trust it just based off whats on the ebay page Quote Link to comment
wildmaninid Posted June 23, 2010 Report Share Posted June 23, 2010 I have had 9 dealings with northwest cylinder head and every one of them was above average. Very knowledgeable and they doo great work.....being a machinist you can tell if someone that claims to be knows what they are talking about. If you are unsure what has been done, just ask they have treated me real well. just my $.02 bill Quote Link to comment
Joe B Posted June 24, 2010 Author Report Share Posted June 24, 2010 Thanks for the opinions fellas. Wildman I really appreciate your actual experiences and may consider getting a head for the bench. For the price, I have the time to go through it if needed. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.