has 32 36 weber carburetor

[510_boyz]

just want to know what the yellow thing is & where cat get 1?? for get bout #'s 1&2

[hang_510]

part of the PCV system.

 

i found something close on the rack at autozone, trimmed it and stuck it in :)

 

http://www.racetep.com/weber.html

[banzai510(hainz)]

Is that a 32/36?????????

 

that yellow thing is really white. I route the valve cover vent to this. Its just a L shaped inlet.

 

If your valve cover is not shooting out oil into the fire wall you could just get soem Speed tape and cover where the white elbow is and not use it.

 

If possible use it as it keep the car from stinking up(if alot of blowby)

[motavated]

Make one out of copper. Is it that vacuum crap your talking about??? Look around ace/hardware store and you will find something that works. You can figure it out...

[510_boyz]

Is that a 32/36?????????

 

that yellow thing is really white. I route the valve cover vent to this. Its just a L shaped inlet.

 

If your valve cover is not shooting out oil into the fire wall you could just get soem Speed tape and cover where the white elbow is and not use it.

 

If possible use it as it keep the car from stinking up(if alot of blowby)

 

 

just the eng on sunday donno if its shooting oil yet (pic is off a vw website)