goes2fast Posted December 25, 2009 Report Share Posted December 25, 2009 (edited) I still need a weber DGV, and an early non smog intake. any help much appreciated.:D;):cool: Just found out my DatDoug broke my dash face getting it ready to ship, so now I need the face real bad. Don't need gauges, just the face panel.:(:(:( Edited January 2, 2010 by goes2fast Link to comment
Guest kamakazi620 Posted December 26, 2009 Report Share Posted December 26, 2009 whitch delete plate?? gauges or console Link to comment
MicroMachinery Posted December 27, 2009 Report Share Posted December 27, 2009 I've got a window crank or two. Link to comment
ariascarlos1990 Posted December 27, 2009 Report Share Posted December 27, 2009 whitch delete plate?? gauges or console There the same. Link to comment
datzenmike Posted December 27, 2009 Report Share Posted December 27, 2009 (edited) a radio delete plate Radio Delete plate Nissan # 68470 B5200.... about $12 @ dealer* Clock/Tach delete Nissan # 25005 B5201.... about $15 @ dealer* * 2004 prices Edited December 27, 2009 by datzenmike Link to comment
ariascarlos1990 Posted December 27, 2009 Report Share Posted December 27, 2009 Radio Delete plate Nissan # 68470 B5200.... about $12 @ dealer*Clock/Tach delete Nissan # 25005 B5201.... about $15 @ dealer* * 2004 prices they still sell those at the dealer? thats cool! Link to comment
goes2fast Posted December 27, 2009 Author Report Share Posted December 27, 2009 I'm going to check at the dealer tomorrow and see if they are still available. I wish the Detriot lockers were still available from the dealer. I would buy one in a heartbeat!:D:D:D Link to comment
Guest kamakazi620 Posted December 29, 2009 Report Share Posted December 29, 2009 There the same. uHHH no their not, the gauge delete has the top corners rounded,as the console top corners are square (datsun Mike back me up) Link to comment
lil89ram50 Posted December 29, 2009 Report Share Posted December 29, 2009 hey i got a weber 38/38... it is a true weber, and not a fake! it is used nut it is not in need of a rebuild, its almost brand new, im second owner, guy had it sitting for a while and put it on his 210 for a couple months, then i put it on my 720 for maybe 2 monthe, and now i upgraded to ka and hve no use...... comes complete with 2 new air cleaner assenbleys, no adapters, 215 obo thanks Link to comment
ariascarlos1990 Posted December 29, 2009 Report Share Posted December 29, 2009 uHHH no their not, the gauge delete has the top corners rounded,as the console top corners are square (datsun Mike back me up) didn't see that you sad "gauges or" well duh the stock tach/clock delete plate is different from the radio delete plate. I was referring to the dash and console radio delete plates are the same..... Link to comment
goes2fast Posted December 29, 2009 Author Report Share Posted December 29, 2009 hey i got a weber 38/38... it is a true weber, and not a fake! it is used nut it is not in need of a rebuild, its almost brand new, im second owner, guy had it sitting for a while and put it on his 210 for a couple months, then i put it on my 720 for maybe 2 monthe, and now i upgraded to ka and hve no use...... comes complete with 2 new air cleaner assenbleys, no adapters, 215 obo thanks I can buy a new one from Redline for that, and one in the same condition ( 200 mi on it) with adaptor just went on ebay for $68, unfotunatly I spaced it out and didn't get online in time to bid.:(:(:( Link to comment
goes2fast Posted December 29, 2009 Author Report Share Posted December 29, 2009 uHHH no their not, the gauge delete has the top corners rounded,as the console top corners are square (datsun Mike back me up) I still will take whatever radio delete plate you Have, please reply!!!:confused::confused::cool: Link to comment
lil89ram50 Posted December 30, 2009 Report Share Posted December 30, 2009 I can buy a new one from Redline for that, and one in the same condition ( 200 mi on it) with adaptor just went on ebay for $68, unfotunatly I spaced it out and didn't get online in time to bid.:(:(:( hey its your money, if you wana buy junk from redline go ahead and be my guest Link to comment
Guest kamakazi620 Posted December 30, 2009 Report Share Posted December 30, 2009 I pm'd ya Link to comment
Phirus Posted December 30, 2009 Report Share Posted December 30, 2009 I got an old street sign to cut out a burshed aluminum dash face. Link to comment
goes2fast Posted December 30, 2009 Author Report Share Posted December 30, 2009 hey its your money, if you wana buy junk from redline go ahead and be my guest Why in the hell would a new kit from Redline be junk? You do know that they are the only Weber importer in the US?:confused:*:confused: Link to comment
goes2fast Posted December 30, 2009 Author Report Share Posted December 30, 2009 I got an old street sign to cut out a burshed aluminum dash face. I was going to use a piece of aluminum and aftermarket gauges, until I added up the cost of all the gauges, Yikes! That would have been almost as much as I paid for my truck, so I decided to go the cheaper but a little more difficult route for now, After I get all the bodywork, interior, drivetrain, and paint done, then I will think about some of the more expensive custom mods.*:)*:cool: Link to comment
Phirus Posted January 2, 2010 Report Share Posted January 2, 2010 I was going to use a piece of aluminum and aftermarket gauges, until I added up the cost of all the gauges, Yikes! That would have been almost as much as I paid for my truck, so I decided to go the cheaper but a little more difficult route for now, After I get all the bodywork, interior, drivetrain, and paint done, then I will think about some of the more expensive custom mods.*:)*:cool: Aluminum face with original gauges. Cut and shaped just like the plastic piece. Link to comment
Recommended Posts