datzenmike Posted December 11, 2009 Report Share Posted December 11, 2009 Looks like that A-87 has been previously milled. Quote Link to comment
79D50 Posted December 11, 2009 Author Report Share Posted December 11, 2009 (edited) Yes...that was my thoughts as well because the lower part of the A87 is kind of hard to read as opposed to others I have seen... My butt dyno sucks because my DD has 340 HP...but it seems to be pretty quick. I leaned out the carb a bit and it seems she picked up a little more umph on the top end. I am not really sure what all has been done to this motor....The PO wasn't exactly talkative or informative even though I fired off a million questions. Edited December 11, 2009 by 79D50 Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 well with drums you really gotta keep them adjusted, often.. mine are fuckin locked up (the adjuster), well one of em is.. so it kind sux.. i do have new shoes on there tho.. also my m/c isnt quite up to the task of powering the drums AND my big 2 piston pathfinder calipers.. i really should look into gettin a better m/c .. which reminds me.. im gettin some prepaid visas for xmas :) Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 btw wheres my 100$ internet dollars.. can i get these in ratsun points? Quote Link to comment
77 rustrat Posted December 11, 2009 Report Share Posted December 11, 2009 worst fucking advice ever! FAIL. :mad: and why is this the worst fuckin advice ever. i have done it and as long as you have ventilation its fine and other people has done it also and that has been said in this thread so that is not a fail if other people have done it. Quote Link to comment
Edz280zx Posted December 11, 2009 Report Share Posted December 11, 2009 http://forums.hybridz.org/showthread.php?t=145690 Here's the thread on HybridZ...interesting read Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 and why is this the worst fuckin advice ever. i have done it and as long as you have ventilation its fine and other people has done it also and that has been said in this thread so that is not a fail if other people have done it. have fun with that.. Quote Link to comment
Edz280zx Posted December 11, 2009 Report Share Posted December 11, 2009 Well.....mine's been like that for two years now...I just don't want to drill into the intake! Quote Link to comment
77 rustrat Posted December 11, 2009 Report Share Posted December 11, 2009 Well.....mine's been like that for two years now...I just don't want to drill into the intake! point made. Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 (edited) i guess braap has a point but still he even says "its not ideal" i would feel alot better about running it to a can over crimping it or capping it off.. but maybe i'll give it a try, cause the oil spitting on the header makes for a smokey ride.. but then wont the crap just come out of the v/c? Edited December 11, 2009 by lynchfourtwenty Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 rusty thats still bad advice (if he can use it he should) Quote Link to comment
Edz280zx Posted December 11, 2009 Report Share Posted December 11, 2009 In my personal experience, I haven't had any problems with oil coming out of the valve cover....but my engine doesn't have much if any blowby. And yes, I agree, it isn't an ideal setup, but it isn't as bad as everyone was making it out to be either. Quote Link to comment
Edz280zx Posted December 11, 2009 Report Share Posted December 11, 2009 rusty thats still bad advice (if he can use it he should) If I could use it, I would.... Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 i forgot bout the timing cover an all that bein open, but as someone said, i havent had oil in an engine with the timing cover off so i didnt know how far it came up.. Quote Link to comment
77 rustrat Posted December 11, 2009 Report Share Posted December 11, 2009 i guess braap has a point but still he even says "its not ideal" i would feel alot better about running it to a can over crimping it or capping it off.. but maybe i'll give it a try, cause the oil spitting on the header makes for a smokey ride.. but then wont the crap just come out of the v/c? running it into a can would be a good idea too but wouldnt you still have all of the toxic fumes in the engine bay and seeping in to the cab. this is just an idea but run it down to the ground kinda like a blow off tube for a turbo. i would still just block it off as long as you have other ventilation it should be fine. but hey what do i know. Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 ya my next engine will have it for sure man, cause this ones got blow by.. she still runs pretty good tho Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 ya we'll see rusty, since i really have no choice.. im jus tired of my eyes burning an shit.. gettin all cheech an chonged out while im drivin an shit.. Quote Link to comment
77 rustrat Posted December 11, 2009 Report Share Posted December 11, 2009 If I could use it, I would.... as would i but if you cant then by all means plug it Quote Link to comment
datzenmike Posted December 11, 2009 Report Share Posted December 11, 2009 (edited) and why is this the worst fuckin advice ever. i have done it and as long as you have ventilation its fine and other people has done it also and that has been said in this thread so that is not a fail if other people have done it. Because other people have done it doesn't make it a good idea. In the short term nothing will be noticed. If you keep track of oil changes you will find a PCV equipped motor will be cleaner inside, the oil will be cleaner, the engine will last longer. Before the early '60s, crankcase fumes were left to exit a down pipe from the crankcase. Ever wonder why you would be very lucky to get 100K miles out of a 50s motor??? Oil was changed every 2 thousand miles. The PCV valve helps a motor last longer by keeping the oil cleaner. Without it, residual fuel and water vapor condense inside the motor overnight and contaminate/dilute the oil. The PCV system is so simple in operation and theory, had absolutely NO effect on performance, virtually foolproof, easy to fix, and so advantageous it should never be disconnected or left off. It's like extending the life of you motor for free. Edited December 11, 2009 by datzenmike Quote Link to comment
Roadracer Al Posted December 11, 2009 Report Share Posted December 11, 2009 Over on LS1Tech.com (I read it for my DD), there is a THIRTEEN PAGE thread on catch cans, PVC valves, and the importance of getting the oil vapor safely out of the motor for exactly the reasons you mention, Mike. I haven't seen it mentioned on LS1Tech, but it's pretty common for NASCAR to use an "crankcase sucker" to pull negative pressure inside the crankcase theoretically increasing HP some small percentage by making the rings seal more effectively and creating a bigger pressure differential above/below the piston. The basic idea is that they use exhaust pulses and an all-metal PCV valve to evacuate the crankcase. There's a tube welded into the exhaust flow right after the collector, and this 'powers' the sucker. Google it. It's probably a bad idea on motors that need rings, however. Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 hearding caddle the size of snouzers but they're cattle.. Quote Link to comment
79D50 Posted December 11, 2009 Author Report Share Posted December 11, 2009 ^^^^Agreed 100%. Think of it this way. It was such a good design and alternative that every manufacturer since the early to mid 60's has adopted it. How can that many engineers and designers be wrong or out to lunch? It's a simple design and definitely prolongs the life of the motor - common sense. I am sick of the smell in the CAB. I have no blowby. I also have no damn PCV hoses. You've seen the pictures...Its hooked up ass backwards and needs to be fixed. I will get to it this weekend. Thanks all that contributed advice. :cool: Quote Link to comment
lynchfourtwenty Posted December 11, 2009 Report Share Posted December 11, 2009 what u dont like riding around like this ?? hehe Quote Link to comment
datzenmike Posted December 11, 2009 Report Share Posted December 11, 2009 (edited) Maybe if you had an SD25 running on hash oil. :D Just pull the manifold 'bung' and get a fitting for the brake booster hose. Edited December 11, 2009 by datzenmike Quote Link to comment
Edz280zx Posted December 11, 2009 Report Share Posted December 11, 2009 Over on LS1Tech.com (I read it for my DD), there is a THIRTEEN PAGE thread on catch cans, PVC valves, and the importance of getting the oil vapor safely out of the motor for exactly the reasons you mention, Mike. I haven't seen it mentioned on LS1Tech, but it's pretty common for NASCAR to use an "crankcase sucker" to pull negative pressure inside the crankcase theoretically increasing HP some small percentage by making the rings seal more effectively and creating a bigger pressure differential above/below the piston. The basic idea is that they use exhaust pulses and an all-metal PCV valve to evacuate the crankcase. There's a tube welded into the exhaust flow right after the collector, and this 'powers' the sucker. Google it. It's probably a bad idea on motors that need rings, however. I had actually thought about doing that exact thing. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.