Datsun-San Posted November 16, 2009 Report Share Posted November 16, 2009 I'm thinking about getting some U.S indy mags for Murasaki that I'm planning on spraying either black or anthrasite, but couldn't figure out if they'll fit without mods. These are 15 x 5 1/2 inch wheels with a 4 1/2 inch lug bolt pattern. They are marked as 15 x 4.5, US Indy Mag and had come off of an old TR6 junk car. They look nice, and they will fit 240/260 z's and 200sx's no problem (apparently). Will these wheels fit without modification? Or will I need to get spacers or something similar? http://by107w.bay107.mail.live.com/att/GetAttachment.aspx?tnail=0&messageId=45c62ccc-d256-11de-bd92-00237de3e47e&Aux=50|0|8CC347A2AE989C0|| Quote Link to comment
Capital15 Posted November 17, 2009 Report Share Posted November 17, 2009 Linky no worky. Quote Link to comment
ggzilla Posted December 9, 2009 Report Share Posted December 9, 2009 I would guess they will fit a Roadster, alhtough you may need low profile tires. I'd buy them. Stock wheels were probalby 4" x 13" with 30mm offset (Roadster guys may know for sure). Quote Link to comment
bonvo Posted December 9, 2009 Report Share Posted December 9, 2009 he also has a 710 so if there going on the 710 those are narrow they will fit but look rather wimpy i have 14x8 in the back of my 610 but i have camber to help me clear where the 710 wouldnt have this Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.