Thomas Perkins

Remove the oil filter.Get one with a lifetime warranty.I got mine from Orielly"s.I had to modify the fittings cause mine dry rotted long ago.I use the one with the gauge,cost more than the one with light.

On 1/14/2024 at 12:11 PM, Stoffregen Motorsports said:

 

 

 

37 minutes ago, Thomas Perkins said:

 

I have a reply for a nissan one.He just sent me a video of it.He will let me know how much.I just tried to send the video here,but it won't let me.He wants 60 which shipping is included.He is in California.Let me know asap.He is waiting.Okay.Kewl.I told him no,and someone else has one for 50,but they probably want shipping.We'll I tried.

You have to replace the whole assembly.I found one on Ebay that was like new for 20 bucks. There is one on Ebay from Thailand for 28.75.The one I bought was a oem one.If you want me to,I will search and see if I can find you a good Nissan oem used one.When Nissan had them,they were 76.59.I just posted on one of my connections for a oem hood release cable in great shape.

Check your power brake hose.

For sale on Facebook, has this Weber linkage for 40 bucks with shipping.On Nissan 720 Owners, same as what I use.Brand new.I use my stock bracket.I have springs, locking clips and nuts.Also a extra pioneer accelerator cable but keeping it.He just posted this.

The last one I got it came with the tail pipe connected to it from Auto Zone, they don't sell them any more.I had a muffler shop that put it on,mine don't have a cat and he charged me 60 bucks and added a piece that was worn out.Major shops make you have a cat to work on exhaust systems in Georgia.

Here are the speakers.My Diamond plate panels I made.I made them a little bigger than the stock one's.Here are the fasteners I used to secure the Diamond plates.A good place to get these and Nissan clips is at clips and fastener's. These clips are for our cowl too if you ever remove it to hunt down a leak. I had a stereo shop here install my Kenwood and 4 speakers and new antenna cable. They did it in a hour and a half.https://www.clipsandfasteners.com/default.asp?Click=180200&gad_source=1&gclid=EAIaIQobChMIzKT6k_CXhQMVWrZaBR1gTg68EAAYASAAEgLxtfD_BwE

The inner circle is 4 and 3/4 inch.

Here are some pics.

The wood is 1/2 thick and 6 1/4 inch by 6 1/4 inch and speaker hangs 1/8 over on the sides.I will send pics.

The speakers are 6.5 inch.It is connected to a 1/2  inch thick piece of wood with the center cut out with it screwed into the side where the kick plates are.I have pictures of it on my home computer.I will post it when I get home from work.The guy that sold me the truck back in 94 made the wood pieces.On the inside of the speakers put some plastic on it so the speakers won't ground out.If they touch the metal,they will.Mine did ,my Kenwood stereo told me it was a faulty connection.

My Bluetooth Kenwood and kick panels.Speakers are way bigger than holes,cut some wood to make fit.Get a piece 36x36 diamond plate from lowes for 52 bucks.

Got mine back in 2009 from Napa.Done put 106,000 miles on it.Got it the same time as my Jasper remaufactured engine.Mine is also a 85,4x4.2.4.

Back in 12/15/2017.Mine was making a noise.I took it to the transmission shop.The yoke was bad.He got me a new one for 135 bucks.They raised it and ran it and seen the problem.I still have the old yoke.Also replaced the u- joint.But that was not bad.See the grooves.Causing it to vibrate.When I would get on the high way,it would not go fast.This was in 2wd.Don't drive in 4wd.I keep it on the road.

https://youtu.be/uwTi1EpgIa0?si=H0OzzcJL1Pw4rB8M

Looks great.

Anyone in need of a brake booster and master cylinder. Came off 85 Nissan truck. Also a hood. Message me if needed.Just posted this 3 hours ago.On Nissan 720 garage on Facebook.Mike Midyette.

When was the last time you changed your rear end oil.I had to replace my seal not long ago.Nissan still sells them.I bought a extra one.

I use Redline MT-90.

12 hours ago, yepp said:

Still available?

I just text him.His site does not say sold.You can go to facebook.His name is Maxwell Chlan.

.

TRUMP IS BACK....https://youtu.be/pav6R4QrpOg?si=JglMWoHHNnPX2Dv5

4 fender flares on facebook for 100 bucks.Like the ones on my 85.On Nissan 720 garage.In Minnesota.Maxwell Chlan.

My gaskets are here,fast shipping,came from Alabama.Let me see if they will work.If not,they will go in the not working pile.I got it on there.Seals great,took it for a test drive.I also got the black ring off the inside of the rotor that was cause by the cap.Time will tell.It also idles perfect,Rpm needle is steady at idle.Guess air was blowing in the distributor from the fan.The flat ones Foxhound suggested probably will also work.The oem ones are 1/16 inch thick.