H20doctor

Why is 180 Hp so hard to believe...? Its stuffed with J E forged Pistons.. Bored out Big time to who knows..? and I had Little monsters Hot rods In marysville do the the Dyno a couple of years ago...re curved my dist to match the timing... cam is above 480... I even had malvern racing do some block work.... I have seen L18 make over 200hp on the track, with no nitrious or turbo"s , My crank was balanced at that dude in mukilteo perpetual Balance, and My flywheel is a 12lb Fidianza.... For get that srdet stuff and all that .. L20 B power Baby...!

an 800.00 head consists of ... High lift cam, custom grind... Terry went deep into the valve chamber and polish out all the Burs in the valve stem area.. Match ported intake and exhaust... Racing nismo springs, stellite seats, the valves have a custom 3 angle grind...Lots of work on this head... My L20 produces 180 Hp... Not bad for a rice burner

I have a brand new head ran on my truck for 10k mi... new valves, seats, cam.. all new.. Nice head... I put 800.00 into it at Seatle auto sport...Sell for 400.00... I do have a L18 head that I pulled from a junk yard... You can have it.. cause I will prob never use it... Let me know or give me a PM

I need Help pulling my block out of my 620 truck... I just need an extra hand to help.. I want to get it done this Sat.7/7 or Sunday 7/8 .. I will reimburse you for gas.. Buy you Lunch and Or Beer... I need to get my 620 back on the road ASAP... Pm Me.. or just call .... thanks Chris 206-713-8434. If I dont answer leave me a msg.. All I have left on my L20 is pull the block off the tranny... Then put my new block on the engine stand and build it from there.. LIke I said I need a extra hand.. Later

Shipping through parts is about 150.00... BIG DEAL... Your getting new OEM parts..I have ordred from them the Hood, Fenders, Chrome bumper, and the Grill.. To my Door for under 425.00.. Its a good deal... and their not fiberglass

Partstrain.com has datsun parts.. cheap cheap.. Hoods fenders, lower valance, grills... etc...

Well I need a good working 4 sp tranny for my 76 truck... let me know ?

I would buy it ... but I would have to tow it home to lake stevens...and I have no way of towing a truck from where its now to my crib

I payed 150.00 for my shorty header... from Top end performance in california... its the Forshizzel... lots of HP... and it cleared all the stuff that yr having problems with... I have a 76 620 truck

ok... it looks like bondo is the way to go...cool... Also what type of sanding and prep work is needed to rough up the dash in order to paint it....? AND what type of rattle can paint should I use..? Krylon, thanks

I heard you can use bondo to fix cracks in and on top of the dashboard...? I am going to pull my dashboard out of my 620 truck and custom paint it.... But i need to fill up some cracks first... anyone fixed a cracked dash before.??? let me know

Why are you dissing 620..? when trucks RULE.!!! dont even go there.... Your truck that you just bought is an easy fix. But yr on the wrong post.. go post on the truck link and we can walk you through it... later

I run a stock distrub. thats been curved to my L20 cam.... Then I run the msd 6A L setup onit... it has been on my truck for over 8 years.. I have had no problems other than adjusting pionts every tune up

my 610 could make it down... its been parked for 2 yrs.. I wuld need to throw in a battery and clean it up.. its been waiting for me to get my 620 back on the road. then I can do the motor swap on the 610.. and all that.. Why would you want me to drive a 4 door 610 down to golden gardens??????

Who did your motor work? I had my L20b done down at Autosport in seattle.. and had my cam custom grinded down at performance in california,, and some work done at malvern racing... I am in lake stevens ... you should help me do my motor swap in my 76 620... LOL... I too blew my motor racing a HONDUHHH..