spottedog Posted January 23, 2009 Report Share Posted January 23, 2009 I need to check a couple before taking one to the machinist. Quote Link to comment
datzenmike Posted January 23, 2009 Report Share Posted January 23, 2009 4.25". Oh OK.... 4.248" Quote Link to comment
spottedog Posted January 23, 2009 Author Report Share Posted January 23, 2009 4.25". Oh OK.... 4.248" Outstanding. Thanks! (I am already at 10.25cr, don't need it any higher after the valve job so going to take in the tallest head I have) :D Quote Link to comment
banzai510(hainz) Posted January 23, 2009 Report Share Posted January 23, 2009 How you get 10 CR????stock L20 is 8.4 or 8.5 CR whats in there already???? you must be Rich to run Supreme in there with Octane booster Quote Link to comment
datzenmike Posted January 23, 2009 Report Share Posted January 23, 2009 Z22 with open L head is 9.8 p nut is 10.3? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.