oldguy68 Posted November 3, 2021 Report Share Posted November 3, 2021 (edited) Hey got a question about engine and trans compatibility, would a 90 Ka24 engine mate up with the standard trans from a 84 720 4x4? Edited November 4, 2021 by oldguy68 forgot year Quote Link to comment
datzenmike Posted November 4, 2021 Report Share Posted November 4, 2021 The bolt pattern is exactly the same, however the engine mount location will be different. 1 Quote Link to comment
oldguy68 Posted November 4, 2021 Author Report Share Posted November 4, 2021 So mounts for the engine are a bit different? is the length significant? I can fabricate I just want something I can work with. Quote Link to comment
datzenmike Posted November 4, 2021 Report Share Posted November 4, 2021 I miss spoke about the length. Find ]2eDeYe... https://ratsun.net/profile/38-2edeye/ ... here on Ratsun who makes KA engine mounts for the 620 but I believe they will work on the 720 also. 1 Quote Link to comment
]2eDeYe Posted November 4, 2021 Report Share Posted November 4, 2021 14 hours ago, oldguy68 said: So mounts for the engine are a bit different? is the length significant? I can fabricate I just want something I can work with. They need to be dropped 3/4" to get the engine level and clear the trans tunnel. Also rear sump is needed for the 720. Thanks Mike, yes my 620 KA mounts work in the 720. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.