debbheff@gmail.com Posted April 24, 2021 Report Share Posted April 24, 2021 When i bought the truck both clutch and brake pedals were on the floor. I've installed new clutch master and brake master cylinders but cannot figure out where to connect the return spring for the brake pedal . my repair manual shows a 521 pedal assembly with spring attached at a point on the pedal moiunt connection pin but no detail where it attaches to the body. any help on where to connect the spring appreciated Thanks 1 Quote Link to comment
Charlie69 Posted April 25, 2021 Report Share Posted April 25, 2021 On the side of the pin is a groove the spring hooks into. Quote Link to comment
debbheff@gmail.com Posted April 25, 2021 Author Report Share Posted April 25, 2021 A bit of research and i found spring attachment clips at napa, believe these will work if i can find a place to clip them. Thanks 1 Quote Link to comment
Charlie69 Posted April 25, 2021 Report Share Posted April 25, 2021 (edited) If you need one of the ones I pictured let me know I have extras. PM me your shipping info and I will drop one in the mail for you. Edited April 25, 2021 by Charlie69 Quote Link to comment
debbheff@gmail.com Posted April 25, 2021 Author Report Share Posted April 25, 2021 Thanks for letting me know you have the parts, I think i have all the pins and springs i need just need the clips. Thanks again 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.