derekg Posted September 2, 2017 Report Share Posted September 2, 2017 My 411 came with 3 steel wheels that have 3 small prongs on the surface at 120 degrees separation and 2 steel wheels that just have the raised area with 4 humps. Both types can be seen in my gallery here: http://datsun510.com/index.php?/gallery/album/772-1966-pl411/. Does anyone have an image of the stock wheels so I know if I need 2 or 3 replacements? Thanks, Derek Quote Link to comment
bkippen Posted September 4, 2017 Report Share Posted September 4, 2017 Derek, I will send you a picture later today. I am in Alameda and have a 66 411 as well. Brian 1 Quote Link to comment
bkippen Posted September 12, 2017 Report Share Posted September 12, 2017 I couldn't figure out how to upload. Looks like stock has 4 humps and 3 prongs. Maybe your prongs were broken off? Quote Link to comment
MikeRL411 Posted October 13, 2017 Report Share Posted October 13, 2017 When all else fails, I have a set of 4 original 13 inch roadster or FWD "310" sedan wheels without the clips for the "dog dish" center wheel covers. They would require full wheel covers like the 1500 roadster or RL411 SEDAN. A bit too far for Oakland, but come to the 2018 JCCS and I will have them in my trunk! Free! Pass on the goodies that you do not have forseeable use for ! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.