TheGam1ngK1ng Posted July 13, 2017 Report Share Posted July 13, 2017 Finished the bottom and and top end. Before I slap the engine in the car, I had one of those oh shit moments and realized I never had cylinder head alignment dowel pins when I reassembled the block. Where can I get them? Ive searched google and nothing comes up! Are they even necessary? :poke: Engine was takin apart years ago. Quote Link to comment
KELMO Posted July 13, 2017 Report Share Posted July 13, 2017 Part # is 11053-73400, sold in a quantity of 10 from Nissan (if still available). Now, do I remember if I used them on my motor? I can neither confirm nor deny. But it stands to reason I have used them on at least one of my motors cuz I have a bag of 8. B) 2 Quote Link to comment
TheGam1ngK1ng Posted July 13, 2017 Author Report Share Posted July 13, 2017 Thanks Buddy B) Quote Link to comment
datzenmike Posted July 13, 2017 Report Share Posted July 13, 2017 Same part number as the L series. I think I one cut a 1/2" length from a piece of copper water pipe to replace a lost one. 1 Quote Link to comment
TheGam1ngK1ng Posted July 13, 2017 Author Report Share Posted July 13, 2017 If it works it works :thumbup: 1 Quote Link to comment
TheGam1ngK1ng Posted July 14, 2017 Author Report Share Posted July 14, 2017 Just an update. There's still a TON available in Cali. Takes about a day to get them over here. They sell them individually now for about $1.50 a piece. Thanks again guys 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.