Speed_Office! Posted October 10, 2015 Report Share Posted October 10, 2015 I am trying to buy new velocity stacks for these carbs and im not sure which ones are compatible,was wondering if anyone knew. I see a ton of them for webers and dellorto but nothing that says it works for solex addhe. im guessing they are all compatible because the carbs look the same but i figured id see if anyone has knowledge on this subject. thanks! Quote Link to comment
TENDRIL Posted October 10, 2015 Report Share Posted October 10, 2015 pretty sure you want the bolt on stack not the slip in. and just order to your carb size 40 1 Quote Link to comment
banzai510(hainz) Posted October 10, 2015 Report Share Posted October 10, 2015 believe the same There is solex made in Italy but really not the same as the jap made ones. but 40mm is 40mm 1 Quote Link to comment
Speed_Office! Posted October 11, 2015 Author Report Share Posted October 11, 2015 I have a long intake manifold and the stacks interfere with the brake master bleeder , one of the PO's just broke the bottom half of the velocity stack off to compensate. no bueno in my book. so im looking to order the shortest set I can find in order to clear it. Quote Link to comment
Speed_Office! Posted October 11, 2015 Author Report Share Posted October 11, 2015 http://www.ebay.com/itm/Dellorto-DHLA-40-Weber-DCOE-trumpets-velocity-stacks-full-radius-DRLA-IDF-40mm-/311450172038?hash=item4883e07a86 think these will work? Quote Link to comment
Speed_Office! Posted October 11, 2015 Author Report Share Posted October 11, 2015 http://www.ebay.com/itm/4-dellorto-weber-40-dcoe-idf-dhla-drla-bolt-on-carb-trumpets-25mm-long-40-25-x4/261632471363?hash=item3cea82b143 or possibly these? Quote Link to comment
KoHeartsGPA Posted October 13, 2015 Report Share Posted October 13, 2015 Just make sure you run filters on those things ;) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.