harlow426@mail.com Posted January 25, 2015 Report Share Posted January 25, 2015 Motor for 'Brownie #3' out of a 4wd. Different oil pan. Do I HAVE 2 swap? Are 4wd pans 'desirable' or used in a different application? Don't want 2 junk if a fellow 'enthusiast' needs one. 1 Quote Link to comment
720jon Posted January 25, 2015 Report Share Posted January 25, 2015 Is it a ka motor? If so, I can use the pan lol 1 Quote Link to comment
harlow426@mail.com Posted January 25, 2015 Author Report Share Posted January 25, 2015 Is it a ka motor? If so, I can use the pan lol No...stock z24 outta a 85-6 720 4wd. Quote Link to comment
datzenmike Posted January 25, 2015 Report Share Posted January 25, 2015 I would say no. The 720 4x4 pan is heavily off set and deeper on the one side. Torsion bars are located differently between 2wd and 4x4. 3 Quote Link to comment
harlow426@mail.com Posted January 25, 2015 Author Report Share Posted January 25, 2015 I would say no. The 720 4x4 pan is heavily off set and deeper on the one side. Torsion bars are located differently between 2wd and 4x4. didn't think so.....easier to ask versus dropping in hole/yankin' back out. Thanks Mike!! 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.