E Brake and how to

[jimmy dale]

OK picked up another D620 this one for me the rear right everything except the backing plate was missing.

so I got a another rear-end and replaced all the way to the 4 nuts.

the new one I got has a E Brake cable hanging off of it but it has been cut. 

I still have one hooked to the truck

the question is how do I get it to come off the backing plate to hook up the original from truck?

[jimmy dale]

been looking someone has to have a post about it but I cant seem to find one

[]2eDeYe]

You need to pull the drum off to remove it. Once you unhook the cable end you depress the prongs holding the cable housing into the backing plate and it will pull out.

[jimmy dale]

I did not see and prongs is it on the inside there are 2 places where it holds?

[]2eDeYe]

They are inside on the metal part of the cable housing that sticks through the backing plate. There are 2 or 3 can't remember exactly.

[jimmy dale]

got it was just plugged in no clips my daughter got it lol  but atleast I have e brake now lol

[]2eDeYe]

Nicely done daughter, nicely done. :)

[jimmy dale]

ok next question where do I find some of the aluminum pieces that the back break line goes in with the bleeder on the other end?

 

[]2eDeYe]

Nissan dealer

 

nissanparts.cc

 

You can get the part numbers here

 

http://www.davidcmurphy.com/olddat/620tech.htm

 

You'll want to pull up the parts sheet for your particular year. You can use that part number at the first link.