wead Posted June 10, 2013 Report Share Posted June 10, 2013 Here's some pics of our new panel that will be available after a test fit is done in the states. Pics are taken with panel on a 510 4 door just so you get the idea! The panel starts at the door and goes all the way to the wheel arch. It won't have a return into the door and the panel will have extra length for you to cut to your requirements. We can put a return in the panel, if we can get our hands on a good template for it. Email us for discounted prices at automotivepanelcraft@gmail.com !! Quote Link to comment
]2eDeYe Posted June 10, 2013 Report Share Posted June 10, 2013 Any plans to do 620 panels? Quote Link to comment
wead Posted June 11, 2013 Author Report Share Posted June 11, 2013 Any plans to do 620 panels? Yes always on the lookout for a good 620 for templates.What are the most common places for rust.Do you have any pics.We've got quite a few b210 and 610 panels so hopefully the 620 or 240z will be next. Quote Link to comment
]2eDeYe Posted June 11, 2013 Report Share Posted June 11, 2013 Usually the rockers and the floor pans. I'll dig up some pics :) Quote Link to comment
wead Posted June 11, 2013 Author Report Share Posted June 11, 2013 That 'll be good thanks.Do you have a 510 2 door by any chance?Looking for someone that will do a test fit on the door to wheel arch/dogleg panel. Quote Link to comment
Ratwagon1600 Posted June 11, 2013 Report Share Posted June 11, 2013 That 'll be good thanks.Do you have a 510 2 door by any chance?Looking for someone that will do a test fit on the door to wheel arch/dogleg panel. What State are you in? Quote Link to comment
Kirden Posted June 11, 2013 Report Share Posted June 11, 2013 I second redeye's statement. I've been looking for a good passenger side rocker panel for a while on my 620. I'd be interested to know what panels you offer for the B210. Edit: Checking out your ebay store now. The panels look really well done. Quote Link to comment
wead Posted June 11, 2013 Author Report Share Posted June 11, 2013 What State are you in? N.S.W. Sydney Quote Link to comment
wead Posted June 11, 2013 Author Report Share Posted June 11, 2013 I second redeye's statement. I've been looking for a good passenger side rocker panel for a while on my 620. I'd be interested to know what panels you offer for the B210. Edit: Checking out your ebay store now. The panels look really well done. If there's anything your interested in send us an email at automotivepanelcraft@gmail.com and will do a better price and or reduced shipping. Quote Link to comment
Ratwagon1600 Posted June 11, 2013 Report Share Posted June 11, 2013 Assuming you may have tried these guys? http://www.sydneydatsunclub.com/ Quote Link to comment
wead Posted June 12, 2013 Author Report Share Posted June 12, 2013 Assuming you may have tried these guys? http://www.sydneydatsunclub.com/ Thanks, I will be getting in contact with Mark soon but I would also like to see it on a car in the States Quote Link to comment
Camtron Posted June 12, 2013 Report Share Posted June 12, 2013 I've got a 510 2-door located in Oklahoma, U.S. and A. AND need these panels (the right much more than the left though). I actually need both lower rear 1/4s, too. I've been planning on ordering them from you guys, but shipping is retarded expensive and my lottery numbers haven't hit yet. Lol Here are some OICs of the nastiness: Left dogleg Left rear 1/4 Right dogleg Right rear 1/4 Quote Link to comment
wead Posted June 12, 2013 Author Report Share Posted June 12, 2013 Thanks for the pics.So you would be interested in doing a test fit for us? Quote Link to comment
Camtron Posted June 12, 2013 Report Share Posted June 12, 2013 You bet. Just let me know what I'd need to do! Quote Link to comment
wead Posted June 12, 2013 Author Report Share Posted June 12, 2013 You bet. Just let me know what I'd need to do! Pm me your address Quote Link to comment
FlyinPat Posted June 12, 2013 Report Share Posted June 12, 2013 I second 620 floor panels! Quote Link to comment
heretic Posted June 12, 2013 Report Share Posted June 12, 2013 3rd I'd buy a set.! Quote Link to comment
Ratwagon1600 Posted June 12, 2013 Report Share Posted June 12, 2013 Thanks, I will be getting in contact with Mark soon but I would also like to see it on a car in the States Mark was the guy I was thinking of. He used to post on here under the name of "DuralDatsun" (I think). If you cant get in touch with him, theres another Aussie on here 510SSS68, whos in SA. Hes a Datsun whore and would probably have 2 door in his collection. BTW, good work on the repros, im starting on front guard lower sections for myself soon. Quote Link to comment
wead Posted June 18, 2013 Author Report Share Posted June 18, 2013 Panel's on it's way for test fit. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.