edekalil Posted April 16, 2013 Report Share Posted April 16, 2013 I know he mark on the left is the rim size but what does the 30 stand for? Here is a full shot of the rim Eddie Quote Link to comment
Tristin Posted April 16, 2013 Report Share Posted April 16, 2013 I would assume +30 offset. Quote Link to comment
edekalil Posted April 16, 2013 Author Report Share Posted April 16, 2013 Thanks for the quick reply. Eddie Quote Link to comment
INDY510 Posted April 16, 2013 Report Share Posted April 16, 2013 It's a Z31 300zx wheel ...... and doesn't fit good on a 510 .... you will need spacers Quote Link to comment
edekalil Posted April 16, 2013 Author Report Share Posted April 16, 2013 When you say spacers do you mean bump steer spacers or some other? I plan to run them in 280zx struts lowered w/ bump steer spacers and adjustable camber plates on a 510 sedan. Eddie Quote Link to comment
Tristin Posted April 16, 2013 Report Share Posted April 16, 2013 No, spacers to bump the wheels out. The wheel has too much positive offset to work with the 510. It would be spacers in between the wheel hub and the hub the on the brake rotor. Quote Link to comment
edekalil Posted April 16, 2013 Author Report Share Posted April 16, 2013 You mean to make the rim sit ferther to the out side away from the rotor. You don't have to change the studs I take it. How much of a spacer would you need to make them work? Eddie Quote Link to comment
Tristin Posted April 16, 2013 Report Share Posted April 16, 2013 Yes on sitting farther out. Possibly on studs. Sometimes they can be too short... It depends on the setup. Quote Link to comment
edekalil Posted April 16, 2013 Author Report Share Posted April 16, 2013 Thanks Eddie Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.