datzun90 Posted January 25, 2013 Report Share Posted January 25, 2013 Hey everyone,I'm getting out of Datsuns and I am looking to sell off some of the neat things I collected over the years. All prices are negotiable (to a certain degree), shipping + paypal are extra. I have a lot more pictures of everything and will gladly e-mail them to you upon request. So without further ado...1. Ported and modded P79 head. The head was first hot tanked and sandblasted, then machined. Professional porting done by SRPD racing in NY, brand new valve guides and stainless swirl polished valves. All of the valve seats have been cut and valves back-cut and lapped to match. I also have brand new high performance valve springs and retainers as well as resurfaced rockers. The head has been shaved .080 and I have a set of .080 cam tower spacers to match. For everything (head, valves, rockers, cam towers, cam tower spacers, and valve springs) I am looking to get $800 -Sold- 2. Weber DCOE42 carburetors on a Cannon intake manifold. The carburetors were rebuilt using OEM Weber parts and gaskets. The manifold has been blasted and refinished, and the linkage disassembled, cleaned, lubricated and readjusted.$1100 3. Camshaft - ground by Norris in California, supposed to be a hot-street cam good for around 7000 RPM. I can get complete specs upon request. $100 -Sold- 4. Single Groove Euro Damper from Professional Products, this is brand new in the box and has only been opened to get pictures of it $85 -sold- 5. Complete Vented front disc setup. Include brand new 4 piston Toyota 4x4 calipers, vented front rotors, custom machined rotor adapters, and new unopened pads. $400 -sold- 6. Complete Modern Motorsports rear disc conversion (for use with S13 rear calipers) Includes new Brembo rear rotors, Modern Motorsports brackets, new, unopened pads, and very clean S13 rear calipers with brackets. $400 -sold- 7. Front LCA's - control arms have been blasted and refinished with POR15, also have brand new energy suspension polyurethane bushings installed $100 -Sold- 8. Rear LCA's - same as front control arms; blasted, refinished, new poly bushings. $100 -Sold- 9. Mustache bar - blasted and refinished in POR15, new poly bushings installed. $100 Keep in mind the prices are negotiable so if you think I'm an a**hole who wants too much, shoot me an offer. Everything is located in Niagara Falls, ON canada for any of you local folks out there. Please PM me with any inquiries. Link to comment
AZhitman Posted January 26, 2013 Report Share Posted January 26, 2013 Free bump for some sweet stuff and a great ad! Link to comment
fivetenzen Posted January 27, 2013 Report Share Posted January 27, 2013 What is the P/N to the harmonic Balancer - thanks Link to comment
240zphilly Posted January 27, 2013 Report Share Posted January 27, 2013 how much for the balancer shipped to 80906? Link to comment
josh817 Posted January 28, 2013 Report Share Posted January 28, 2013 Would you be willing to sell just the front rotor spacers? If not, possibly PM with measurements so I can get them made?Thank you, good luck with your sale. Link to comment
datzun90 Posted February 6, 2013 Author Report Share Posted February 6, 2013 What is the P/N to the harmonic Balancer - thanks balancer is sold now, thanks Link to comment
datzun90 Posted February 6, 2013 Author Report Share Posted February 6, 2013 balancer and front brake setup is now sold. Thanks Link to comment
BenJammin Posted February 6, 2013 Report Share Posted February 6, 2013 Looks like some decent engine parts, but just have to say for those prices, those control arms must have been pitted as hell to look like that even after sandblasting. Maybe shoulda found better cores to start with. Link to comment
datzun90 Posted February 13, 2013 Author Report Share Posted February 13, 2013 bumpity bump Link to comment
datzun90 Posted February 13, 2013 Author Report Share Posted February 13, 2013 Looks like some decent engine parts, but just have to say for those prices, those control arms must have been pitted as hell to look like that even after sandblasting. Maybe shoulda found better cores to start with. I'm always open to offers, prices aren't set in stone. 1 Link to comment
datzun90 Posted March 10, 2013 Author Report Share Posted March 10, 2013 Price drop bump Link to comment
Recommended Posts